[PATCH v10 1/2] mtd: spi-nor: Add support for is25wp256

[<Tudor.Ambarus@xxxxxxxxxxxxx>]

From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>

Update the spi_nor_id table for is25wp256 (32MB) device from ISSI,
present on HiFive Unleashed dev board (Rev: A00).

Use the post bfpt fixup hook for the is25wp256 device, as done for
the is25lp256 device to overwrite the wrong address width advertised
by BFPT.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
[tudor.ambarus@xxxxxxxxxxxxx: rebase, split and adapt for v5.4-rc4]
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
---
Sagar, I set the fixups hook in this patch, to avoid adding support for a flash that doesn't work from day one.

 drivers/mtd/spi-nor/spi-nor.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 7acf4a93b592..3fc1eb20dca5 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2267,6 +2267,10 @@ static const struct flash_info spi_nor_ids[] = {
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256,
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_4B_OPCODES)
+		       .fixups = &is25lp256_fixups },
 
 	/* Macronix */
 	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/