Re: [PATCH v9 0/2] mtd: spi-nor: add support for is25wp256 spi-nor flash

[Sagar Kadam <sagar.kadam@xxxxxxxxxx>]

Hi,

On Wed, Sep 18, 2019 at 9:32 PM Sagar Shrikant Kadam
<sagar.kadam@xxxxxxxxxx> wrote:
>
> The patch series adds basic support for 32MiB spi-nor is25wp256 present on HiFive
> Unleashed A00 board. The flash device gets BFPT_DWORD1_ADDRESS_BYTES_3_ONLY
> from BFPT table for address width, whereas the flash can support 4 byte
> address width, so the address width is configured by using the post bfpt
> fixup hook as done for is25lp256 device in
> commit cf580a924005 ("mtd: spi-nor: fix nor->addr_width when its value
> configured from SFDP does not match the actual width")
>
> Patches are based on original work done by Wesley Terpstra and/or
> Palmer Dabbelt:
> https://github.com/riscv/riscv-linux/commit/c94e267766d62bc9a669611c3d0c8ed5ea26569b
>
> Erase/Read/Write operations are verified on HiFive Unleashed board using  mtd and
> flash utils (v1.5.2):
> 1. mtd_debug    : Options available are : erase/read/write.
> 2. flashcp      : Single utility that erases flash, writes a file to flash and verifies the data back.
>
> The changes are available under branch dev/sagark/spi-nor-v9 at
> https://github.com/sagsifive/riscv-linux-hifive
>
> Revision history:
> V8<->V9:
> -Rebased this series to mainline v5.3-rc8
> -Corrected number of sectors in the spi nor id table for is25wp256 device as suggested in the review.
> -The lock/unlock scheme in the V8 version of this series needs to have a more generic approach.
>  These protection scheme patches are not included in this series, will submit those separately.
>

A gentle reminder!!
Any comments on this series?

Thanks & BR,
Sagar Kadam

> V7<->V8:
> -Rebased this series on mainline v5.3-rc4.
> -Removed remaining func_reg reference from issi_lock as updating OTP region was dropped as part of V6.
> -Updated Reviewed-By tags to 1st and 2nd patch.
>
> V6<->V7:
> -Incorporated review comments from Vignesh.
> -Used post bfpt fixup hook as suggested by Vignesh.
> -Introduce SPI_NOR_HAS_BP3 to identify whether the flash has 4th bit protect bit.
> -Prefix generic flash access functions with spi_nor_xxxx.
>
> V5<->V6:
> -Incorporated review comments from Vignesh.
> -Set addr width based on device size and if SPI_NOR_4B_OPCODES is set.
> -Added 4th block protect identifier (SPI_NOR_HAS_BP3) to flash_info structure
> -Changed flash_info: flag from u16 to u32 to accommodate SPI_NOR_HAS_BP3
> -Prefix newly added function with spi_nor_xxx.
> -Dropped write_fr function, as updating OTP bit's present in function register doesn't seem to be a good idea.
> -Set lock/unlock schemes based on whether the ISSI device has locking support and  BP3 bit present.
>
> V4<->V5:
> -Rebased to linux version v5.2-rc1.
> -Updated heading of this cover letter with sub-system, instead of just plain "add support for is25wp256..."
>
> V3<->V4:
> -Extracted comman code and renamed few stm functions so that it can be reused for issi lock implementation.
> -Added function's to read and write FR register, for selecting Top/Bottom area.
>
> V2<->V3:
> -Rebased patch to mainline v5.1 from earlier v5.1-rc5.
> -Updated commit messages, and cover letter with reference to git URL and author information.
> -Deferred flash_lock mechanism and can go as separate patch.
>
> V1<-> V2:
> -Incorporated changes suggested by reviewers regarding patch/cover letter versioning, references of patch.
> -Updated cover letter with description for flash operations verified with these changes.
> -Add support for unlocking is25xxxxxx device.
> -Add support for locking is25xxxxxx device.
>
> v1:
> -Add support for is25wp256 device.
>
> Sagar Shrikant Kadam (2):
>   mtd: spi-nor: add support for is25wp256
>   mtd: spi-nor: fix nor->addr_width for is25wp256
>
>  drivers/mtd/spi-nor/spi-nor.c | 9 ++++++++-
>  include/linux/mtd/spi-nor.h   | 1 +
>  2 files changed, 9 insertions(+), 1 deletion(-)
>
> --
> 1.9.1
>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/