Re: [PATCH v2 03/22] mtd: spi-nor: cadence-quadspi: Fix cqspi_command_read() definition

[Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>]

On Tue, 24 Sep 2019 07:45:58 +0000
<Tudor.Ambarus@xxxxxxxxxxxxx> wrote:

> From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> 
> n_tx was never used, drop it. Replace 'const u8 *txbuf' with 'u8 opcode',
> to comply with the SPI NOR int (*read_reg)() method. The 'const'
> qualifier has no meaning for parameters passed by value, drop it.
> Going furher, the opcode was passed to cqspi_calc_rdreg() and never used,
> drop it.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>

> ---
>  drivers/mtd/spi-nor/cadence-quadspi.c | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> index ebda612641a4..22008fecd326 100644
> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> @@ -285,7 +285,7 @@ static irqreturn_t cqspi_irq_handler(int this_irq, void *dev)
>  	return IRQ_HANDLED;
>  }
>  
> -static unsigned int cqspi_calc_rdreg(struct spi_nor *nor, const u8 opcode)
> +static unsigned int cqspi_calc_rdreg(struct spi_nor *nor)
>  {
>  	struct cqspi_flash_pdata *f_pdata = nor->priv;
>  	u32 rdreg = 0;
> @@ -354,8 +354,7 @@ static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg)
>  	return cqspi_wait_idle(cqspi);
>  }
>  
> -static int cqspi_command_read(struct spi_nor *nor,
> -			      const u8 *txbuf, const unsigned n_tx,
> +static int cqspi_command_read(struct spi_nor *nor, u8 opcode,
>  			      u8 *rxbuf, size_t n_rx)
>  {
>  	struct cqspi_flash_pdata *f_pdata = nor->priv;
> @@ -373,9 +372,9 @@ static int cqspi_command_read(struct spi_nor *nor,
>  		return -EINVAL;
>  	}
>  
> -	reg = txbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
> +	reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
>  
> -	rdreg = cqspi_calc_rdreg(nor, txbuf[0]);
> +	rdreg = cqspi_calc_rdreg(nor);
>  	writel(rdreg, reg_base + CQSPI_REG_RD_INSTR);
>  
>  	reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB);
> @@ -471,7 +470,7 @@ static int cqspi_read_setup(struct spi_nor *nor)
>  	unsigned int reg;
>  
>  	reg = nor->read_opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB;
> -	reg |= cqspi_calc_rdreg(nor, nor->read_opcode);
> +	reg |= cqspi_calc_rdreg(nor);
>  
>  	/* Setup dummy clock cycles */
>  	dummy_clk = nor->read_dummy;
> @@ -604,7 +603,7 @@ static int cqspi_write_setup(struct spi_nor *nor)
>  	/* Set opcode. */
>  	reg = nor->program_opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB;
>  	writel(reg, reg_base + CQSPI_REG_WR_INSTR);
> -	reg = cqspi_calc_rdreg(nor, nor->program_opcode);
> +	reg = cqspi_calc_rdreg(nor);
>  	writel(reg, reg_base + CQSPI_REG_RD_INSTR);
>  
>  	reg = readl(reg_base + CQSPI_REG_SIZE);
> @@ -1087,7 +1086,7 @@ static int cqspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len)
>  
>  	ret = cqspi_set_protocol(nor, 0);
>  	if (!ret)
> -		ret = cqspi_command_read(nor, &opcode, 1, buf, len);
> +		ret = cqspi_command_read(nor, opcode, buf, len);
>  
>  	return ret;
>  }


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/