Re: [PATCH 5/6] mtd: spi-nor: Add s3an_post_sfdp_fixups()

[Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>]

On Wed, 31 Jul 2019 09:12:16 +0000
<Tudor.Ambarus@xxxxxxxxxxxxx> wrote:

> From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> 
> s3an_nor_scan() was overriding the opcode selection done in
> spi_nor_default_setup(). Set nor->setup() method in order to
> avoid unnecessary call to spi_nor_default_setup().
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 35 +++++++++++++++++++++++++----------
>  1 file changed, 25 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 0ff474e5e4f5..5fea5d7ce2cb 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2795,7 +2795,9 @@ static int spi_nor_check(struct spi_nor *nor)
>  	return 0;
>  }
>  
> -static int s3an_nor_scan(struct spi_nor *nor)
> +static int s3an_nor_setup(struct spi_nor *nor,
> +			  const struct spi_nor_flash_parameter *params,
> +			  const struct spi_nor_hwcaps *hwcaps)
>  {
>  	int ret;
>  	u8 val;
> @@ -4393,6 +4395,11 @@ static void spansion_post_sfdp_fixups(struct spi_nor *nor)
>  	nor->mtd.erasesize = nor->info->sector_size;
>  }
>  
> +static void s3an_post_sfdp_fixups(struct spi_nor *nor)
> +{
> +	nor->setup = s3an_nor_setup;
> +}
> +
>  static void
>  spi_nor_manufacturer_post_sfdp_fixups(struct spi_nor *nor,
>  				      struct spi_nor_flash_parameter *params)
> @@ -4405,6 +4412,9 @@ spi_nor_manufacturer_post_sfdp_fixups(struct spi_nor *nor,
>  	default:
>  		break;
>  	}
> +
> +	if (nor->info->flags & SPI_S3AN)
> +		s3an_post_sfdp_fixups(nor);
>  }
>  
>  static void spi_nor_post_sfdp_fixups(struct spi_nor *nor,
> @@ -4582,9 +4592,9 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
>  	return 0;
>  }
>  
> -static int spi_nor_setup(struct spi_nor *nor,
> -			 const struct spi_nor_flash_parameter *params,
> -			 const struct spi_nor_hwcaps *hwcaps)
> +static int spi_nor_default_setup(struct spi_nor *nor,
> +				 const struct spi_nor_flash_parameter *params,
> +				 const struct spi_nor_hwcaps *hwcaps)
>  {
>  	u32 ignored_mask, shared_mask;
>  	int err;
> @@ -4641,6 +4651,16 @@ static int spi_nor_setup(struct spi_nor *nor,
>  	return err;
>  }
>  
> +static int spi_nor_setup(struct spi_nor *nor,
> +			 const struct spi_nor_flash_parameter *params,
> +			 const struct spi_nor_hwcaps *hwcaps)
> +{
> +	if (!nor->setup)
> +		return 0;
> +
> +	return nor->setup(nor, params, hwcaps);
> +}
> +
>  static int spi_nor_disable_write_protection(struct spi_nor *nor)
>  {
>  	if (!nor->disable_write_protection)
> @@ -4804,6 +4824,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	/* Kept only for backward compatibility purpose. */
>  	nor->quad_enable = spansion_quad_enable;
>  	nor->set_4byte = spansion_set_4byte;
> +	nor->setup = spi_nor_default_setup;
>  
>  	/* Default locking operations. */
>  	if (info->flags & SPI_NOR_HAS_LOCK) {
> @@ -4905,12 +4926,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  		return -EINVAL;
>  	}
>  
> -	if (info->flags & SPI_S3AN) {
> -		ret = s3an_nor_scan(nor);
> -		if (ret)
> -			return ret;
> -	}
> -
>  	/* Send all the required SPI flash commands to initialize device */
>  	ret = spi_nor_init(nor);
>  	if (ret)

Almost all of this (except the s3an specific bits) should be done in
the previous patch. So I'll put a condition on the R-b I placed on patch
4: some of this code should be moved there.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/