Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller

[masonccyang@xxxxxxxxxxx]

Hi Boris,

> > > 
> > > Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND 
controller
> > > 
> > > On Tue, 18 Jun 2019 08:14:36 +0200
> > > Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> wrote:
> > > 
> > > > > > > > > 
> > > > > > > > > How to make all #CS keep high for NAND to enter 
> > > > > > > > > low-power standby mode if driver don't use 
> > "legacy.select_chip()" 
> > > > > ? 
> > > > > > > > 
> > > > > > > > See commit 02b4a52604a4 ("mtd: rawnand: Make 
->select_chip() 
> > > > > optional 
> > > > > > > > when ->exec_op() is implemented") which states:
> > > > > > > > 
> > > > > > > >         "When [->select_chip() is] not implemented, the 
core 
> > is 
> > > > > assuming 
> > > > > > > >    the CS line is automatically asserted/deasserted by the 
 
> > driver 
> > > > > > > >    ->exec_op() implementation." 
> > > > > > > > 
> > > > > > > > Of course, the above is right only when the controller 
driver 
> > 
> > > > > supports 
> > > > > > > > the ->exec_op() interface. 
> > > > > > > 
> > > > > > > Currently, it seems that we will get the incorrect data and  

> > error
> > > > > > > operation due to CS in error toggling if CS line is 
controlled 
> > in 
> > > > > > > ->exec_op(). 
> > > 
> > > Oh, and please provide the modifications you added on top of this 
patch.
> > > Right now we're speculating on what you've done which is definitely 
not
> > > an efficient way to debug this sort of issues. 
> > 
> > The patch is to add in beginning of ->exec_op() to control CS# low and 

> > before return from ->exec_op() to control CS# High.
> > i.e,.
> > static in mxic_nand_exec_op( )
> > {
> >  cs_to_low();
> > 
> > 
> > 
> >  cs_to_high();
> >  return;
> > }
> > 
> > But for nand_onfi_detect(), 
> > it calls nand_read_param_page_op() and then nand_read_data_op().
> > mxic_nand_exec_op() be called twice for nand_onfi_detect() and
> > driver will get incorrect ONFI parameter table data from 
> > nand_read_data_op().
> 
> And I think it's valid to release the CE pin between
> read_param_page_op() (CMD(0xEC)+ADDR(0x0)) and read_data_op() (data
> cycles) if your chip is CE-dont-care compliant. So, either you have a
> problem with your controller driver (CS-related timings are incorrect)
> or your chip is not CE-dont-care compliant.

Understood, I will try to fix it on my NFC driver.

And I think CS# pin goes to high is much important for power consumption.

thanks & best regards,
Mason





CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/