On 21.05.19 10:17, Sascha Hauer wrote: > memorg->ntargets is initialized with '1'. It should be initialized with > the maxchips argument from nand_scan() instead. Otherwise multi chip > support errors out on the secondary chip selects when trying to call > nand_reset() on them: > > WARNING: CPU: 0 PID: 1 at drivers/mtd/nand/raw/internals.h:114 > nand_reset_op+0x194/0x1c4 > > With this memorg->ntargets is initialized with the maximum number of > chip selects supported by the driver. After having detected the number > of actually connected chips memory->ntargets is updated with that > number. > > Fixes: 2813e288414 ("mtd: rawnand: Get rid of chip->numchips") > > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Thanks for reporting/fixing this. Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> > --- > drivers/mtd/nand/raw/nand_base.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c > index 7db0f04cf52b..0c717f3fb906 100644 > --- a/drivers/mtd/nand/raw/nand_base.c > +++ b/drivers/mtd/nand/raw/nand_base.c > @@ -4621,7 +4621,8 @@ nand_manufacturer_name(const struct nand_manufacturer *manufacturer) > /* > * Get the flash and manufacturer id and lookup if the type is supported. > */ > -static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type) > +static int nand_detect(struct nand_chip *chip, unsigned int maxchips, > + struct nand_flash_dev *type) > { > const struct nand_manufacturer *manufacturer; > struct mtd_info *mtd = nand_to_mtd(chip); > @@ -4638,7 +4639,7 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type) > memorg = nanddev_get_memorg(&chip->base); > memorg->planes_per_lun = 1; > memorg->luns_per_target = 1; > - memorg->ntargets = 1; > + memorg->ntargets = maxchips; > > /* > * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) > @@ -5004,7 +5005,7 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips, > return ret; > > /* Read the flash type */ > - ret = nand_detect(chip, table); > + ret = nand_detect(chip, maxchips, table); > if (ret) { > if (!(chip->options & NAND_SCAN_SILENT_NODEV)) > pr_warn("No NAND device found\n"); > ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/