The mxs dma driver uses the flags parameter in dmaengine_prep_slave_sg() for custom flags, but still uses the dmaengine specific names of the flags. Do a little bit better and at least give the flag a custom name. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Acked-by: Vinod Koul <vkoul@xxxxxxxxxx> --- drivers/dma/mxs-dma.c | 4 ++-- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 17 +++++++++++------ include/linux/dma/mxs-dma.h | 2 ++ 3 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 62ee9328aea1..c622bee7eb12 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -541,7 +541,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits = 0; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - if (flags & DMA_CTRL_ACK) + if (flags & MXS_DMA_CTRL_WAIT4END) ccw->bits |= CCW_WAIT4END; ccw->bits |= CCW_HALT_ON_TERM; ccw->bits |= CCW_TERM_FLUSH; @@ -573,7 +573,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits &= ~CCW_CHAIN; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - if (flags & DMA_CTRL_ACK) + if (flags & MXS_DMA_CTRL_WAIT4END) ccw->bits |= CCW_WAIT4END; } } diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 9c44d6d21d04..0ec55c7620e8 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -926,7 +926,8 @@ static int gpmi_send_command(struct gpmi_nand_data *this) sg_init_one(sgl, this->cmd_buffer, this->command_length); dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(channel, - sgl, 1, DMA_MEM_TO_DEV, DMA_CTRL_ACK); + sgl, 1, DMA_MEM_TO_DEV, + MXS_DMA_CTRL_WAIT4END); if (!desc) return -EINVAL; @@ -996,7 +997,8 @@ static int gpmi_send_data(struct gpmi_nand_data *this, const void *buf, int len) /* [2] send DMA request */ prepare_data_dma(this, buf, len, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_MEM_TO_DEV, DMA_CTRL_ACK); + 1, DMA_MEM_TO_DEV, + MXS_DMA_CTRL_WAIT4END); if (!desc) return -EINVAL; @@ -1033,7 +1035,8 @@ static int gpmi_read_data(struct gpmi_nand_data *this, void *buf, int len) /* [2] : send DMA request */ direct = prepare_data_dma(this, buf, len, DMA_FROM_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_DEV_TO_MEM, DMA_CTRL_ACK); + 1, DMA_DEV_TO_MEM, + MXS_DMA_CTRL_WAIT4END); if (!desc) return -EINVAL; @@ -1083,7 +1086,8 @@ static int gpmi_send_page(struct gpmi_nand_data *this, dma_addr_t payload, pio[5] = auxiliary; desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio), - DMA_TRANS_NONE, DMA_CTRL_ACK); + DMA_TRANS_NONE, + MXS_DMA_CTRL_WAIT4END); if (!desc) return -EINVAL; @@ -1140,7 +1144,8 @@ static int gpmi_read_page(struct gpmi_nand_data *this, dma_addr_t payload, pio[4] = payload; pio[5] = auxiliary; desc = mxs_dmaengine_prep_pio(channel, pio, ARRAY_SIZE(pio), - DMA_TRANS_NONE, DMA_CTRL_ACK); + DMA_TRANS_NONE, + MXS_DMA_CTRL_WAIT4END); if (!desc) return -EINVAL; @@ -1157,7 +1162,7 @@ static int gpmi_read_page(struct gpmi_nand_data *this, dma_addr_t payload, pio[1] = 0; pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */ desc = mxs_dmaengine_prep_pio(channel, pio, 3, DMA_TRANS_NONE, - DMA_CTRL_ACK); + MXS_DMA_CTRL_WAIT4END); if (!desc) return -EINVAL; diff --git a/include/linux/dma/mxs-dma.h b/include/linux/dma/mxs-dma.h index 092b2a7b92ac..4a33f2c8a682 100644 --- a/include/linux/dma/mxs-dma.h +++ b/include/linux/dma/mxs-dma.h @@ -4,6 +4,8 @@ #include <linux/dmaengine.h> +#define MXS_DMA_CTRL_WAIT4END BIT(31) + /* * The mxs dmaengine can do PIO transfers. We pass a pointer to the PIO words * in the second argument to dmaengine_prep_slave_sg when the direction is -- 2.20.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/