Re: [PATCH v2 1/3] mtd: spinand: Add #define-s for page-read ops with three-byte addresses

[Marek Vasut <marek.vasut@xxxxxxxxx>]

On 5/14/19 11:53 PM, Jeff Kletsky wrote:
> From: Jeff Kletsky <git-commits@xxxxxxxxxxxx>

That #define in $subject is called a macro.

Seems this patch adds a lot of almost duplicate code, can it be somehow
de-duplicated ?

> The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes three-byte addresses
> for its page-read ops.
> 
> http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
> 
> Signed-off-by: Jeff Kletsky <git-commits@xxxxxxxxxxxx>
> ---
>  include/linux/mtd/spinand.h | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index b92e2aa955b6..05fe98eebe27 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -68,30 +68,60 @@
>  		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
>  		   SPI_MEM_OP_DATA_IN(len, buf, 1))
>  
> +#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
> +		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 1))
> +
>  #define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len)	\
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
>  		   SPI_MEM_OP_ADDR(2, addr, 1),				\
>  		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
>  		   SPI_MEM_OP_DATA_IN(len, buf, 2))
>  
> +#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len)	\
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 2))
> +
>  #define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len)	\
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
>  		   SPI_MEM_OP_ADDR(2, addr, 1),				\
>  		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
>  		   SPI_MEM_OP_DATA_IN(len, buf, 4))
>  
> +#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len)	\
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 4))
> +
>  #define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len)	\
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
>  		   SPI_MEM_OP_ADDR(2, addr, 2),				\
>  		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
>  		   SPI_MEM_OP_DATA_IN(len, buf, 2))
>  
> +#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 2),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 2))
> +
>  #define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len)	\
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
>  		   SPI_MEM_OP_ADDR(2, addr, 4),				\
>  		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
>  		   SPI_MEM_OP_DATA_IN(len, buf, 4))
>  
> +#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 4),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 4))
> +
>  #define SPINAND_PROG_EXEC_OP(addr)					\
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
>  		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> 


-- 
Best regards,
Marek Vasut

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/