From: Jeff Kletsky <git-commits@xxxxxxxxxxxx> The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices and, while it has the same logical layout as the E-series devices, it differs in the SPI interfacing in significant ways. This support is contingent on previous commits to: * Add support for two-byte device IDs * Add #define-s for page-read ops with three-byte addresses http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/ Signed-off-by: Jeff Kletsky <git-commits@xxxxxxxxxxxx> --- drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------ 1 file changed, 64 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c index 0b49d8264bef..d6497ac4c5d8 100644 --- a/drivers/mtd/nand/spi/gigadevice.c +++ b/drivers/mtd/nand/spi/gigadevice.c @@ -9,11 +9,17 @@ #include <linux/mtd/spinand.h> #define SPINAND_MFR_GIGADEVICE 0xC8 + #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4) #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4) #define GD5FXGQ4UEXXG_REG_STATUS2 0xf0 +#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK (7 << 4) +#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS (0 << 4) +#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4) +#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4) + static SPINAND_OP_VARIANTS(read_cache_variants, SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), @@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants, SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); +static SPINAND_OP_VARIANTS(read_cache_variants_f, + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0), + SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0)); + static SPINAND_OP_VARIANTS(write_cache_variants, SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), SPINAND_PROG_LOAD(true, 0, NULL, 0)); @@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section, return 0; } +static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = { + .ecc = gd5fxgq4xa_ooblayout_ecc, + .free = gd5fxgq4xa_ooblayout_free, +}; + static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand, u8 status) { @@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand, return -EINVAL; } -static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section, +static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *region) { if (section) @@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section, return 0; } -static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section, +static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section, struct mtd_oob_region *region) { if (section) @@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section, return 0; } +static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = { + .ecc = gd5fxgq4_variant2_ooblayout_ecc, + .free = gd5fxgq4_variant2_ooblayout_free, +}; + static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand, u8 status) { @@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand, return -EINVAL; } -static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = { - .ecc = gd5fxgq4xa_ooblayout_ecc, - .free = gd5fxgq4xa_ooblayout_free, -}; +static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand, + u8 status) +{ + switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) { + case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS: + return 0; -static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = { - .ecc = gd5fxgq4uexxg_ooblayout_ecc, - .free = gd5fxgq4uexxg_ooblayout_free, -}; + case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS: + return 3; + + case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR: + return -EBADMSG; + + default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */ + return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2; + } + + return -EINVAL; +} static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_INFO("GD5F1GQ4xA", 0xF1, @@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = { &write_cache_variants, &update_cache_variants), 0, - SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout, + SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout, gd5fxgq4uexxg_ecc_get_status)), + SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148, + NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1), + NAND_ECCREQ(8, 512), + SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f, + &write_cache_variants, + &update_cache_variants), + 0, + SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout, + gd5fxgq4ufxxg_ecc_get_status)), }; static int gigadevice_spinand_detect(struct spinand_device *spinand) { u8 *id = spinand->id.data; + u16 did; int ret; /* - * For GD NANDs, There is an address byte needed to shift in before IDs - * are read out, so the first byte in raw_id is dummy. + * Earlier GDF5-series devices (A,E) return [0][MID][DID] + * Later (F) devices return [MID][DID1][DID2] */ - if (id[1] != SPINAND_MFR_GIGADEVICE) + + if (id[0] == SPINAND_MFR_GIGADEVICE) + did = (id[1] << 8) + id[2]; + else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE) + did = id[2]; + else return 0; ret = spinand_match_and_init(spinand, gigadevice_spinand_table, ARRAY_SIZE(gigadevice_spinand_table), - id[2]); + did); if (ret) return ret; -- 2.20.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/