Re: [PATCH] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hi Jeff,

On 10.05.19 14:17, lede@xxxxxxxxxxxx wrote:
> From: Jeff Kletsky <git-commits@xxxxxxxxxxxx>
> 
> The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
> and, while it has the same logical layout as the E-series devices,
> it differs in the SPI interfacing in significant ways.
> 
> To accommodate these changes, this patch also:
> 
>    * Adds support for two-byte manufacturer IDs
>    * Adds #define-s for three-byte addressing for read ops
> 
> http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
> 
> Signed-off-by: Jeff Kletsky <git-commits@xxxxxxxxxxxx>

Maybe it would be better to split this patch into three parts:
* Add support for two-byte manufacturer IDs
* Add #define-s for three-byte addressing for read ops
* Add support for GD5F1GQ4UFxxG

Anyway the content looks good to me, so:

Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

> ---
>   drivers/mtd/nand/spi/core.c       |  2 +-
>   drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++++++++--------
>   include/linux/mtd/spinand.h       | 34 ++++++++++++++++-
>   3 files changed, 97 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index fa87ae28cdfe..a13154785dad 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -853,7 +853,7 @@ spinand_select_op_variant(struct spinand_device *spinand,
>    */
>   int spinand_match_and_init(struct spinand_device *spinand,
>   			   const struct spinand_info *table,
> -			   unsigned int table_size, u8 devid)
> +			   unsigned int table_size, u16 devid)
>   {
>   	struct nand_device *nand = spinand_to_nand(spinand);
>   	unsigned int i;
> diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
> index 0b49d8264bef..d6497ac4c5d8 100644
> --- a/drivers/mtd/nand/spi/gigadevice.c
> +++ b/drivers/mtd/nand/spi/gigadevice.c
> @@ -9,11 +9,17 @@
>   #include <linux/mtd/spinand.h>
>   
>   #define SPINAND_MFR_GIGADEVICE			0xC8
> +
>   #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
>   #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
>   
>   #define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
>   
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS	(1 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
> +
>   static SPINAND_OP_VARIANTS(read_cache_variants,
>   		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
>   		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
> @@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
>   		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
>   		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
>   
> +static SPINAND_OP_VARIANTS(read_cache_variants_f,
> +		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
> +
>   static SPINAND_OP_VARIANTS(write_cache_variants,
>   		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
>   		SPINAND_PROG_LOAD(true, 0, NULL, 0));
> @@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> +static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
> +	.ecc = gd5fxgq4xa_ooblayout_ecc,
> +	.free = gd5fxgq4xa_ooblayout_free,
> +};
> +
>   static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
>   					 u8 status)
>   {
> @@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
>   	return -EINVAL;
>   }
>   
> -static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
> +static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
>   				       struct mtd_oob_region *region)
>   {
>   	if (section)
> @@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> -static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
> +static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
>   					struct mtd_oob_region *region)
>   {
>   	if (section)
> @@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> +static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
> +	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
> +	.free = gd5fxgq4_variant2_ooblayout_free,
> +};
> +
>   static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
>   					u8 status)
>   {
> @@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
>   	return -EINVAL;
>   }
>   
> -static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
> -	.ecc = gd5fxgq4xa_ooblayout_ecc,
> -	.free = gd5fxgq4xa_ooblayout_free,
> -};
> +static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
> +					u8 status)
> +{
> +	switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
> +		return 0;
>   
> -static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
> -	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
> -	.free = gd5fxgq4uexxg_ooblayout_free,
> -};
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
> +		return 3;
> +
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
> +		return -EBADMSG;
> +
> +	default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
> +		return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
> +	}
> +
> +	return -EINVAL;
> +}
>   
>   static const struct spinand_info gigadevice_spinand_table[] = {
>   	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
> @@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
>   					      &write_cache_variants,
>   					      &update_cache_variants),
>   		     0,
> -		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
> +		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
>   				     gd5fxgq4uexxg_ecc_get_status)),
> +	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
> +		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
> +				     gd5fxgq4ufxxg_ecc_get_status)),
>   };
>   
>   static int gigadevice_spinand_detect(struct spinand_device *spinand)
>   {
>   	u8 *id = spinand->id.data;
> +	u16 did;
>   	int ret;
>   
>   	/*
> -	 * For GD NANDs, There is an address byte needed to shift in before IDs
> -	 * are read out, so the first byte in raw_id is dummy.
> +	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
> +	 * Later (F) devices return [MID][DID1][DID2]
>   	 */
> -	if (id[1] != SPINAND_MFR_GIGADEVICE)
> +
> +	if (id[0] == SPINAND_MFR_GIGADEVICE)
> +		did = (id[1] << 8) + id[2];
> +	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
> +		did = id[2];
> +	else
>   		return 0;
>   
>   	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
>   				     ARRAY_SIZE(gigadevice_spinand_table),
> -				     id[2]);
> +				     did);
>   	if (ret)
>   		return ret;
>   
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index b92e2aa955b6..8901ba272538 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -68,30 +68,60 @@
>   		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
>   		   SPI_MEM_OP_DATA_IN(len, buf, 1))
>   
> +#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
> +		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 1))
> +
>   #define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len)	\
>   	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
>   		   SPI_MEM_OP_ADDR(2, addr, 1),				\
>   		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
>   		   SPI_MEM_OP_DATA_IN(len, buf, 2))
>   
> +#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len)	\
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 2))
> +
>   #define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len)	\
>   	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
>   		   SPI_MEM_OP_ADDR(2, addr, 1),				\
>   		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
>   		   SPI_MEM_OP_DATA_IN(len, buf, 4))
>   
> +#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len)	\
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 4))
> +
>   #define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len)	\
>   	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
>   		   SPI_MEM_OP_ADDR(2, addr, 2),				\
>   		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
>   		   SPI_MEM_OP_DATA_IN(len, buf, 2))
>   
> +#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 2),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 2))
> +
>   #define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len)	\
>   	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
>   		   SPI_MEM_OP_ADDR(2, addr, 4),				\
>   		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
>   		   SPI_MEM_OP_DATA_IN(len, buf, 4))
>   
> +#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
> +		   SPI_MEM_OP_ADDR(3, addr, 4),				\
> +		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
> +		   SPI_MEM_OP_DATA_IN(len, buf, 4))
> +
>   #define SPINAND_PROG_EXEC_OP(addr)					\
>   	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
>   		   SPI_MEM_OP_ADDR(3, addr, 1),				\
> @@ -260,7 +290,7 @@ struct spinand_ecc_info {
>    */
>   struct spinand_info {
>   	const char *model;
> -	u8 devid;
> +	u16 devid;
>   	u32 flags;
>   	struct nand_memory_organization memorg;
>   	struct nand_ecc_req eccreq;
> @@ -415,7 +445,7 @@ static inline void spinand_set_of_node(struct spinand_device *spinand,
>   
>   int spinand_match_and_init(struct spinand_device *dev,
>   			   const struct spinand_info *table,
> -			   unsigned int table_size, u8 devid);
> +			   unsigned int table_size, u16 devid);
>   
>   int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
>   int spinand_select_target(struct spinand_device *spinand, unsigned int target);
> 
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux