Re: [RFC PATCH v2 2/5] dt-bindings: mtd: Add binding documentation for Hyperbus memory devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello!

On 03/21/2019 08:45 PM, Vignesh Raghavendra wrote:

> Add DT binding documentation for Hyperbus memory devices. Only
> Hyperflash is supported at the moment.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> ---
>  Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
> new file mode 100644
> index 000000000000..cb408f80b868
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
> @@ -0,0 +1,6 @@
> +Bindings for Hyperflash NOR flash chips compliant with Cypress Hyperbus
> +specification and supports Cypress CFI specification 1.5 command set.
> +
> +Required properties:
> +- compatible : "cypress,hyperflash" for Hyperflash NOR chips

   What about "cfi-flash", shouldn't it be also specified?

> +- reg : Address where flash's memory mapped space

MBR, Sergei

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux