Re: [PATCH v2] cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer

[Vignesh R <vigneshr@xxxxxx>]

On 22-Feb-19 8:20 PM, liujian (CE) wrote:
> 
>> -----Original Message-----
>> From: Vignesh R [mailto:vigneshr@xxxxxx]
>> Sent: Friday, February 22, 2019 1:59 PM
>> To: liujian (CE) <liujian56@xxxxxxxxxx>; dwmw2@xxxxxxxxxxxxx;
>> computersforpeace@xxxxxxxxx; bbrezillon@xxxxxxxxxx;
>> marek.vasut@xxxxxxxxx; richard@xxxxxx; joakim.tjernlund@xxxxxxxxxxxx;
>> ikegami@xxxxxxxxxxxxxxxxxxxx; keescook@xxxxxxxxxxxx
>> Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
>> Subject: Re: [PATCH v2] cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer
>>
>>
>>
>> On 20/02/19 2:17 AM, Liu Jian wrote:
>>> In function do_write_buffer(), in the for loop, there is a case
>>> chip_ready() returns 1 while chip_good() returns 0, so it never break
>>> the loop.
>>> To fix this, chip_good() is enough and it should timeout if it stay
>>> bad for a while.
>>>
>>> Fixes: dfeae1073583 ("mtd: cfi_cmdset_0002: Change write buffer to
>>> check correct value")
>>> Signed-off-by: Yi Huaijie <yihuaijie@xxxxxxxxxx>
>>> Signed-off-by: Liu Jian <liujian56@xxxxxxxxxx>
>>> Reviewed-by: Tokunori Ikegami <ikegami_to@xxxxxxxxxxx>
>>> ---
>>> v1->v2:
>>> change git log, put the Fixes tag on a single line
>>>
>>>  drivers/mtd/chips/cfi_cmdset_0002.c | 6 +++---
>>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c
>>> b/drivers/mtd/chips/cfi_cmdset_0002.c
>>> index 72428b6..818e94b 100644
>>> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
>>> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
>>> @@ -1876,14 +1876,14 @@ static int __xipram do_write_buffer(struct
>> map_info *map, struct flchip *chip,
>>>  			continue;
>>>  		}
>>>
>>> -		if (time_after(jiffies, timeo) && !chip_ready(map, adr))
>>> -			break;
>>> -
>>>  		if (chip_good(map, adr, datum)) {
>>>  			xip_enable(map, chip, adr);
>>>  			goto op_done;
>>>  		}
>>>
>>> +		if (time_after(jiffies, timeo))
>>> +			break;
>>> +
>>
>> It is quite possible that this thread might be pre-empted just after
>> chip_good() check but before before time_after(). If the thread, then resumes
>> execution after timeo has elasped then, this code will wrongly indicate write
>> failure.
>>
>> To avoid this case, you should add one more check for check_good() even when
>> time_after() returns true. Something like:
>>
>> 	if (time_after(jiffies, timeo)) {
>> 		if (chip_good(map, adr, datum)) {
>> 			xip_enable(map, chip, adr);
>> 			goto op_done;
>> 		}
>> 		break;
>> 	}
>>
> So,  the patch should like this ?
> 
> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
> index 72428b6..3da2376 100644
> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> @@ -1876,7 +1876,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
>                         continue;
>                 }
> 
> -               if (time_after(jiffies, timeo) && !chip_ready(map, adr))
> +               if (time_after(jiffies, timeo) && !chip_good(map, adr, datum))
>                         break;
> 
>                 if (chip_good(map, adr, datum)) {
> 
> 
> 
> Any other opinions?
> If there are no other comments, I will send a patch again

Looks fine to me.. Please submit a new version. Thanks!

Regards
Vignesh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/