In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae1073583 ("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Yi Huaijie <yihuaijie@xxxxxxxxxx> Signed-off-by: Liu Jian <liujian56@xxxxxxxxxx> Reviewed-by: Tokunori Ikegami <ikegami_to@xxxxxxxxxxx> --- v1->v2: change git log, put the Fixes tag on a single line drivers/mtd/chips/cfi_cmdset_0002.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 72428b6..818e94b 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -1876,14 +1876,14 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, continue; } - if (time_after(jiffies, timeo) && !chip_ready(map, adr)) - break; - if (chip_good(map, adr, datum)) { xip_enable(map, chip, adr); goto op_done; } + if (time_after(jiffies, timeo)) + break; + /* Latency issues. Drop the lock, wait a while and retry */ UDELAY(map, chip, adr, 1); } -- 2.7.4 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/