From: Your Name <patch-notifications@xxxxxxxxxxxxxxx> On Tue, 2019-02-05 at 15:52:51 UTC, Martin Kepplinger wrote: > Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft > reset may cause bus master lock up") for MX28 too. It has the same > problem. > > Observed problem: once per 100,000+ MX28 reboots NAND read failed on > DMA timeout errors: > [ 1.770823] UBI: attaching mtd3 to ubi0 > [ 2.768088] gpmi_nand: DMA timeout, last DMA :1 > [ 3.958087] gpmi_nand: BCH timeout, last DMA :1 > [ 4.156033] gpmi_nand: Error in ECC-based read: -110 > [ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64 > bytes from PEB 0:0, read only 0 bytes, retry > [ 4.171283] step 1 error > [ 4.173846] gpmi_nand: Chip: 0, Error -1 > > Without BCH soft reset we successfully executed 1,000,000 MX28 reboots. > > I have a quote from NXP regarding this problem, from July 18th 2016: > > "As the i.MX23 and i.MX28 are of the same generation, they share many > characteristics. Unfortunately, also the erratas may be shared. > In case of the documented erratas and the workarounds, you can also > apply the workaround solution of one device on the other one. This have > been reported, but I’m afraid that there are not an estimated date for > updating the Errata documents. > Please accept our apologies for any inconveniences this may cause." > > Fixes: 6f2a6a52560a ("mtd: nand: gpmi: reset BCH earlier, too, to avoid > NAND startup problems") > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Manfred Schlaegl <manfred.schlaegl@xxxxxxxxxxxxx> > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx> > Reviewed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx> > Acked-by: Han Xu <han.xu@xxxxxxx> Applied to http://git.infradead.org/linux-mtd.git mtd/fixes, thanks. y'all come back now! ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/