Re: [PATCH v3 10/13] dt-bindings: spi: atmel-quadspi: make "pclk" mandatory

[Boris Brezillon <bbrezillon@xxxxxxxxxx>]

On Sat, 2 Feb 2019 04:07:39 +0000
<Tudor.Ambarus@xxxxxxxxxxxxx> wrote:

> From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> 
> Naming clocks is a good practice. Make "pclk" madatory even if
> we support unnamed clock in the driver, to be backward compatible
> with old DTs.
> 
> Suggested-by: Boris Brezillon <bbrezillon@xxxxxxxxxx>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> ---
> v3: new patch
> 
>  Documentation/devicetree/bindings/spi/atmel-quadspi.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
> index e9dae6264d89..1de54e87f5d6 100644
> --- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
> +++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
> @@ -9,6 +9,7 @@ Required properties:
>                    - qspi_mmap: memory mapped address space
>  - interrupts:     Should contain the interrupt for the device.
>  - clocks:         The phandle of the clock needed by the QSPI controller.
> +- clock-names:    Should contain "pclk" for the peripheral clock.
>  - #address-cells: Should be <1>.
>  - #size-cells:    Should be <0>.
>  
> @@ -20,6 +21,7 @@ spi@f0020000 {
>  	reg-names = "qspi_base", "qspi_mmap";
>  	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
>  	clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
> +	clock-names = "pclk"

Missing semicolon. Once fixed you can add

Reviewed-by: Boris Brezillon <bbrezillon@xxxxxxxxxx>

>  	#address-cells = <1>;
>  	#size-cells = <0>;
>  	pinctrl-names = "default";


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/