On Sat, 2 Feb 2019 04:07:33 +0000 <Tudor.Ambarus@xxxxxxxxxxxxx> wrote: > From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> > > Remove NOP when setting read transfer type. Remove useless > setting of write transfer type when > op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes. > > QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi, > rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR. > > Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> > --- > v3: new patch > > drivers/spi/atmel-quadspi.c | 12 +++--------- > 1 file changed, 3 insertions(+), 9 deletions(-) > > diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c > index d26d4cd0e36b..bfa5f5e92d96 100644 > --- a/drivers/spi/atmel-quadspi.c > +++ b/drivers/spi/atmel-quadspi.c > @@ -113,11 +113,7 @@ > #define QSPI_IFR_OPTL_4BIT (2 << 8) > #define QSPI_IFR_OPTL_8BIT (3 << 8) > #define QSPI_IFR_ADDRL BIT(10) > -#define QSPI_IFR_TFRTYP_MASK GENMASK(13, 12) > -#define QSPI_IFR_TFRTYP_TRSFR_READ (0 << 12) > -#define QSPI_IFR_TFRTYP_TRSFR_READ_MEM (1 << 12) > -#define QSPI_IFR_TFRTYP_TRSFR_WRITE (2 << 12) > -#define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13) > +#define QSPI_IFR_SAMA5D2_WRITE_TRSFR BIT(13) Can you define QSPI_IFR_TFRTYP_MEM (bit 12) even if it's not used yet? > #define QSPI_IFR_CRM BIT(14) > #define QSPI_IFR_NBDUM_MASK GENMASK(20, 16) > #define QSPI_IFR_NBDUM(n) (((n) << 16) & QSPI_IFR_NBDUM_MASK) > @@ -273,10 +269,8 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) > if (op->data.nbytes) > ifr |= QSPI_IFR_DATAEN; > > - if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes) > - ifr |= QSPI_IFR_TFRTYP_TRSFR_READ; > - else > - ifr |= QSPI_IFR_TFRTYP_TRSFR_WRITE; > + if (op->data.dir == SPI_MEM_DATA_OUT) > + ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR; > > /* Clear pending interrupts */ > (void)readl_relaxed(base + QSPI_SR); ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/