Re: [PATCH -next] mtd: rawnand: stm32_fmc2: Make some functions static

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2019/1/30 18:34, Miquel Raynal wrote:
> Hi Yue,
> 
> YueHaibing <yuehaibing@xxxxxxxxxx> wrote on Wed, 30 Jan 2019 18:09:08
> +0800:
> 
>> Fixes the following sparse warning:
>> drivers/mtd/nand/raw/stm32_fmc2_nand.c:1228:6: warning: symbol 'stm32_fmc2_read_data' was not declared. Should it be static?
>> drivers/mtd/nand/raw/stm32_fmc2_nand.c:1275:6: warning: symbol 'stm32_fmc2_write_data' was not declared. Should it be static?
>> drivers/mtd/nand/raw/stm32_fmc2_nand.c:1707:32: warning: symbol 'stm32_fmc2_nand_ooblayout_ops' was not declared. Should it be static?
>>
>> Signed-off-by: YueHaibing <yuehaibing@xxxxxxxxxx>
>> ---
>>  drivers/mtd/nand/raw/stm32_fmc2_nand.c | 10 +++++-----
>>  1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> index e057282..999ca6a 100644
>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> @@ -1225,8 +1225,8 @@ static irqreturn_t stm32_fmc2_irq(int irq, void *dev_id)
>>  	return IRQ_HANDLED;
>>  }
>>  
>> -void stm32_fmc2_read_data(struct nand_chip *chip, void *buf,
>> -			  unsigned int len, bool force_8bit)
>> +static void stm32_fmc2_read_data(struct nand_chip *chip, void *buf,
>> +				 unsigned int len, bool force_8bit)
>>  {
>>  	struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
>>  	void __iomem *io_addr_r = fmc2->data_base[fmc2->cs_sel];
>> @@ -1272,8 +1272,8 @@ void stm32_fmc2_read_data(struct nand_chip *chip, void *buf,
>>  		stm32_fmc2_set_buswidth_16(fmc2, true);
>>  }
>>  
>> -void stm32_fmc2_write_data(struct nand_chip *chip, const void *buf,
>> -			   unsigned int len, bool force_8bit)
>> +static void stm32_fmc2_write_data(struct nand_chip *chip, const void *buf,
>> +				  unsigned int len, bool force_8bit)
>>  {
>>  	struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
>>  	void __iomem *io_addr_w = fmc2->data_base[fmc2->cs_sel];
>> @@ -1704,7 +1704,7 @@ static int stm32_fmc2_nand_ooblayout_free(struct mtd_info *mtd, int section,
>>  	return 0;
>>  }
>>  
>> -const struct mtd_ooblayout_ops stm32_fmc2_nand_ooblayout_ops = {
>> +static const struct mtd_ooblayout_ops stm32_fmc2_nand_ooblayout_ops = {
>>  	.ecc = stm32_fmc2_nand_ooblayout_ecc,
>>  	.free = stm32_fmc2_nand_ooblayout_free,
>>  };
> 
> This is nand/next material, so if you don't mind I would like to squash
> this fix into the original commit inserting the driver.

Sure, ok

> 
> 
> Thanks,
> Miquèl
> 
> .
> 


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/




[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux