Hi Yue, YueHaibing <yuehaibing@xxxxxxxxxx> wrote on Wed, 30 Jan 2019 18:09:08 +0800: > Fixes the following sparse warning: > drivers/mtd/nand/raw/stm32_fmc2_nand.c:1228:6: warning: symbol 'stm32_fmc2_read_data' was not declared. Should it be static? > drivers/mtd/nand/raw/stm32_fmc2_nand.c:1275:6: warning: symbol 'stm32_fmc2_write_data' was not declared. Should it be static? > drivers/mtd/nand/raw/stm32_fmc2_nand.c:1707:32: warning: symbol 'stm32_fmc2_nand_ooblayout_ops' was not declared. Should it be static? > > Signed-off-by: YueHaibing <yuehaibing@xxxxxxxxxx> > --- > drivers/mtd/nand/raw/stm32_fmc2_nand.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c > index e057282..999ca6a 100644 > --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c > +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c > @@ -1225,8 +1225,8 @@ static irqreturn_t stm32_fmc2_irq(int irq, void *dev_id) > return IRQ_HANDLED; > } > > -void stm32_fmc2_read_data(struct nand_chip *chip, void *buf, > - unsigned int len, bool force_8bit) > +static void stm32_fmc2_read_data(struct nand_chip *chip, void *buf, > + unsigned int len, bool force_8bit) > { > struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller); > void __iomem *io_addr_r = fmc2->data_base[fmc2->cs_sel]; > @@ -1272,8 +1272,8 @@ void stm32_fmc2_read_data(struct nand_chip *chip, void *buf, > stm32_fmc2_set_buswidth_16(fmc2, true); > } > > -void stm32_fmc2_write_data(struct nand_chip *chip, const void *buf, > - unsigned int len, bool force_8bit) > +static void stm32_fmc2_write_data(struct nand_chip *chip, const void *buf, > + unsigned int len, bool force_8bit) > { > struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller); > void __iomem *io_addr_w = fmc2->data_base[fmc2->cs_sel]; > @@ -1704,7 +1704,7 @@ static int stm32_fmc2_nand_ooblayout_free(struct mtd_info *mtd, int section, > return 0; > } > > -const struct mtd_ooblayout_ops stm32_fmc2_nand_ooblayout_ops = { > +static const struct mtd_ooblayout_ops stm32_fmc2_nand_ooblayout_ops = { > .ecc = stm32_fmc2_nand_ooblayout_ecc, > .free = stm32_fmc2_nand_ooblayout_free, > }; This is nand/next material, so if you don't mind I would like to squash this fix into the original commit inserting the driver. Thanks, Miquèl ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/