MX25L25635F and MX25L25635E share the same JEDEC-ID, but the F variant supports 4-byte opcodes while the E variant doesn't. We need a way to differentiate those 2 chips and set the SNOR_F_4B_OPCODES flag only for the F variant. Luckily, 4-byte opcode support is not the only difference: Fast Read 4-4-4 is only supported by the F variant, and this feature is advertised in the BFPT table. Use this to decide when to set the SNOR_F_4B_OPCODES flag. Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx> --- Changes in v5: - Follow the flash_info entry format Changes in v4: - New patch --- drivers/mtd/spi-nor/spi-nor.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 7bc9887d9c0a..fdff18cb1196 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1447,6 +1447,31 @@ static int macronix_quad_enable(struct spi_nor *nor); .addr_width = 3, \ .flags = SPI_NOR_NO_FR | SPI_S3AN, +static int +mx25l25635_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + /* + * MX25L25635F support 4B opcodes but MX25L25635E does not. + * Unfortunately, Macronix has re-used the same JEDEC ID for both the + * variants which prevents us from defining a new entry in the parts + * table. + * We need a way to differentiate MX25L25635E and MX25L25635F, and it + * seems that the F version advertises support for Fast Read 4-4-4 in + * its BFPT table. + */ + if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4) + nor->flags |= SNOR_F_4B_OPCODES; + + return 0; +} + +static struct spi_nor_fixups mx25l25635_fixups = { + .post_bfpt = mx25l25635_post_bfpt_fixups, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -1581,7 +1606,9 @@ static const struct flash_info spi_nor_ids[] = { { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) + .fixups = &mx25l25635_fixups }, { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, -- 2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/