On which micron part are you seeing the problem. I'm using MT29F4G16A and see similar issue. Data sheet says that erase takes from 0.7ms up to 3ms don't know if Micron tunes the delay per part or per block. Maybe on some blocks it's not enough. ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
[PATCH RFC] mtd: rawnand: Cure MICRON NAND partial erase issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH RFC] mtd: rawnand: Cure MICRON NAND partial erase issue
- From: "Wojtaszczyk, Piotr" <WojtaszczykP@xxxxxxxxxxxxxxxxxx>
- Date: Fri, 30 Nov 2018 16:40:50 +0000
- Accept-language: en-US
- References: <mailman.5261.1543570682.2376.linux-mtd@lists.infradead.org>
- Prev by Date: [PATCH RFC] mtd: rawnand: Cure MICRON NAND partial erase
- Next by Date: [PATCH RFC 00/15] Zero ****s, hugload of hugs <3
- Previous by thread: RE: [EXT] Re: [PATCH RFC] mtd: rawnand: Cure MICRON NAND partial erase issue
- Next by thread: [PATCH RFC] mtd: rawnand: Cure MICRON NAND partial erase issue
- Index(es):
 |