RE: [LINUX PATCH v12 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation

[Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>]

Hi Miquel,

> -----Original Message-----
> From: Miquel Raynal [mailto:miquel.raynal@xxxxxxxxxxx]
> Sent: Friday, November 9, 2018 6:24 PM
> To: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
> Cc: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>; richard@xxxxxx; dwmw2@xxxxxxxxxxxxx;
> computersforpeace@xxxxxxxxx; marek.vasut@xxxxxxxxx; Michal Simek
> <michals@xxxxxxxxxx>; linux-mtd@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> nagasuresh12@xxxxxxxxx; robh@xxxxxxxxxx
> Subject: Re: [LINUX PATCH v12 1/3] dt-bindings: mtd: arasan: Add device tree binding
> documentation
> 
> Hi Naga,
> 
> [...]
> 
> > > > diff --git a/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > > > b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > > > new file mode 100644
> > > > index 0000000..b522daf
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > > > @@ -0,0 +1,32 @@
> > > > +Arasan NAND Flash Controller with ONFI 3.1 support
> > > > +
> > > > +Required properties:
> > > > +- compatible:		Should be "xlnx,zynqmp-nand", "arasan,nfc-v3p10"
> > > > +- reg:			Memory map for module access
> > > > +- interrupts:		Should contain the interrupt for the device
> > > > +- clock-name:		List of input clocks - "sys", "flash"
> > > > +			(See clock bindings for details)
> > > > +- clocks:		Clock phandles (see clock bindings for details)
> > > > +
> > > > +Required properties for child node:
> > > > +- nand-ecc-mode: see nand.txt
> > >
> > > Why is it required? Can't you fallback to HW when this prop is missing?
> > Yes, we can.
> > Do you want me to update that in driver now?
> > Looks like you have some comments in driver as well, so while
> > addressing those I will update the code to fallback to HW ECC when It is missing.
> 
> Yes, please.
> 
> >
> > > Oh, and reg is not listed in the required props.
> > Which reg?
> > I already mention this " reg:	Memory map for module access " in required properties.
> >
> > Thanks,
> > Naga Sureshkumar Relli
> > >
> > > > +
> > > > +For NAND partition information please refer the below file
> > > > +Documentation/devicetree/bindings/mtd/partition.txt
> > > > +
> > > > +Example:
> > > > +	nfc: nand@ff100000 {
> > > > +		compatible = "xlnx,zynqmp-nand", "arasan,nfc-v3p10";
> > > > +		reg = <0x0 0xff100000 0x1000>;
> > > > +		clock-name = "sys", "flash";
> > > > +		clocks = <&misc_clk &misc_clk>;
> > > > +		interrupt-parent = <&gic>;
> > > > +		interrupts = <0 14 4>;
> > > > +		#address-cells = <1>;
> > > > +		#size-cells = <0>;
> > > > +
> > > > +		nand@0 {
> > > > +			reg = <0>;
> 
> This one, for the CS line(s).
Ok got it. I will update.

Thanks,
Naga Sureshkumar Relli
> 
> > > > +			nand-ecc-mode = "hw";
> > > > +		};
> > > > +	};
> >
> 
> 
> Thanks,
> Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/