This patch series adds the basic driver support for Arasan NAND Flash controller. We are reinitiating the patch series by fixing the comments given by Miquel and Boris. Major changes are exec_op() implementation related. Rebased to 4.19 nand tree. Tested MT29F32G08ABCDBJ4. As suggested by Boris, it also adds a new varaible called mode in struct nand_sdr_timings, which will give directly the sdr operating mode. and it is useful for some controllers, where we can set direclty the operating mode instead of timings. Naga Sureshkumar Relli (3): dt-bindings: mtd: arasan: Add device tree binding documentation mtd: rawnand: Add an option to get sdr timing mode number mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller .../devicetree/bindings/mtd/arasan_nand.txt | 32 + drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/arasan_nand.c | 1238 ++++++++++++++++++++ drivers/mtd/nand/raw/nand_timings.c | 6 + include/linux/mtd/rawnand.h | 1 + 6 files changed, 1285 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/arasan_nand.txt create mode 100644 drivers/mtd/nand/raw/arasan_nand.c -- 2.7.4 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/