It is enough to use chip_good() only so chip_ready() is not necessary. For this change the order to check timeout is also needed to chagne. Signed-off-by: Tokunori Ikegami <ikegami@xxxxxxxxxxxxxxxxxxxx> Cc: Fabio Bettoni <fbettoni@xxxxxxxxx> Co: Hauke Mehrtens <hauke@xxxxxxxxxx> Co: Koen Vandeputte <koen.vandeputte@xxxxxxxxxxxx> Cc: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> Cc: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx> Cc: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx --- Changes since v1: - None. drivers/mtd/chips/cfi_cmdset_0002.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 251c9e1675bd..c2e51768a02c 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -1882,14 +1882,14 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, continue; } - if (time_after(jiffies, timeo) && !chip_ready(map, adr)) - break; - if (chip_good(map, adr, datum)) { xip_enable(map, chip, adr); goto op_done; } + if (time_after(jiffies, timeo)) + break; + /* Latency issues. Drop the lock, wait a while and retry */ UDELAY(map, chip, adr, 1); } -- 2.18.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/