[PATCH 0/2] mtd: rawnand: micron: Fix on-die ECC

[boris.brezillon@xxxxxxxxxxx (Boris Brezillon)]

On Mon,  9 Jul 2018 23:09:35 +0200
Boris Brezillon <boris.brezillon at bootlin.com> wrote:

> Chris, Bean,
> 
> Here are 2 patches for you to review/test. The first one is fixing
> the layout definition, and unless I missed something it should be
> correct.
> 
> The second one is just my understanding of how byte 5 of READ_ID works
> based on our experience with the 4bit/512 on-die ECC chip we have
> worked on and the other datasheet I had a look at.
> I'm not 100% sure this will work for all chips, but might work for the
> 2 chips we support right now.

I tested it on a MT29F2G08ABAEAH4 (4bit/512bytes on-die ECC) and it
works as expected. When I do the SET_FEATURES(ECC_EN) the ECC enabled
bit in READID byte 5 is set, and when I do SET_FEATURES(ECC_DIS), the
bit is cleared.

Now we need to make sure it works correctly on MT29F1G08ABAFAWP.

> So please test and/or review it and let me know if this approach works.
> 
> Regards,
> 
> Boris
> 
> Boris Brezillon (2):
>   mtd: rawnand: micron: Define the proper layout for 8bit/512bytes
>     on-die ECC
>   mtd: rawnand: micron: Fix on-die ECC detection logic
> 
>  drivers/mtd/nand/raw/nand_micron.c | 110 +++++++++++++++++++++++++------------
>  1 file changed, 75 insertions(+), 35 deletions(-)
>