Re: dosemu - can't see USB drive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bart,

thank you for your suggestion, as I now have proper access to the USB
drive.  There are still more hurdles as KERNEL.SYS is not found during
sys e:, but this is real progress.

The reason for looking at F: was that I saw the CD at E: and the ASElabs
intrsutrctions had F: listed.

Thanks again.

Groeten,

Frank

On Thu, 2009-09-24 at 11:07 -0400, Bart Oldeman wrote:
> On Thu, Sep 24, 2009 at 10:05 AM, Frank Jansen <fjansen@xxxxxxxxxxx> wrote:
> > device: /dev/sdb1 type 3 partition# 1 h: -1 s: -1 t: -1 drive E:
> > E: HD3, Pri[ 1], CHS=   0-1-1, start=   0 MB, size= 476 MB
> 
> If this E: corresponds to your USB you should be able to see it after doing
> lredir del e:
> in DOSEMU at the DOS prompt, because the CDROM default redirection put
> in autoexec.bat overrides it.
> 
> Why were you looking at F: though?
> 
> Bart

--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Console]     [Linux Audio]     [Linux for Hams]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite Camping]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Samba]     [Linux Media]     [Fedora Users]

  Powered by Linux