I'm in the process of trying to create a USB DOS Bootable drive per the instructions from ASElabs Everything runs fine, including fix /proc/sys/vm/mmap_min_addr to get dosemu to work. I get into dosemu and boot.log shows: device: /etc/dosemu/drives/c type 4 h: -1 s: -1 t: -1 drive C: device: /etc/dosemu/drives/d type 4 h: -1 s: -1 t: -1 drive D: device: /dev/sdb1 type 3 partition# 1 h: -1 s: -1 t: -1 drive E: CONF: cdrom MSCD0001 on /dev/cdrom CONF: config variable c_system unset and in the dosemu window: C: HD1, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 392 MB D: HD2, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 392 MB E: HD3, Pri[ 1], CHS= 0-1-1, start= 0 MB, size= 476 MB UMB's unavailable! However, F: is invalid... Any thoughts or hints on how to see /dev/sdb1? I have verified that there is rwx access exists for all. Thanks, Frank -- To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
