Ping. Thanks, Avri > This commit adds missing documentation for the "writeprotect user get" > command to both the man page (mmc.1) and the documentation page > (docs/HOWTO.rst). > > The "writeprotect user get" command prints the user areas write protect > configuration for the specified device. > > Signed-off-by: Avri Altman <avri.altman@xxxxxxx> > > --- > Changes in v2: > - Fix a typo (Christian) > --- > docs/HOWTO.rst | 3 +++ > mmc.1 | 3 +++ > 2 files changed, 6 insertions(+) > > diff --git a/docs/HOWTO.rst b/docs/HOWTO.rst > index 095a9bd..3902fa4 100644 > --- a/docs/HOWTO.rst > +++ b/docs/HOWTO.rst > @@ -28,6 +28,9 @@ Running mmc-utils > If <number> is passed (0 or 1), only protect that particular eMMC boot > partition, otherwise protect both. It will be write-protected until the next > boot. > -p Protect partition permanently instead. NOTE! -p is a one-time > programmable (unreversible) change. > > + ``writeprotect user get <device>`` > + Print the user areas write protect configuration for <device>. > + > ``writeprotect user set <type> <start block> <blocks> <device>`` > Set user area write protection. > > diff --git a/mmc.1 b/mmc.1 > index 543742c..2f7209c 100644 > --- a/mmc.1 > +++ b/mmc.1 > @@ -27,6 +27,9 @@ If \fInumber\fR is passed (0 or 1), only protect that > specified eMMC boot partit > .br > It will be write-protected until the next boot. > .TP > +.BI writeprotect " " user " " get " " \fIdevice\fR > +Print the user areas write protect configuration for <device>. > +.TP > .BI writeprotect " " user " " set " " \fItype\fR " " \fIstart\-block\fR " " > \fIblocks\fR " " \fIdevice\fR > Set the write protect configuration for the specified region of the user area for > the device. > .br > -- > 2.25.1
