On Wed, Nov 27, 2024 at 11:17:08AM +0800, Yuanjie Yang wrote: > The sdhci-msm driver supports the device in both RUNNING > and IDLE states, when eMMC/SD are not reading or writing, > eMMC/SD are in IDLE state, the power management module > will suspend the device(power off and reduce frequency, > etc.), putting the device into a low-power mode. But the > current sdhci-msm driver cannot put device enter into > low-power mode. > > Enable aggressive PM capability to support runtime PM > functionality, allowing the eMMC/SD card to enter > lowe-power mode. > > Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx> What is the difference to [1] ? [1] https://lore.kernel.org/linux-arm-msm/20241104060722.10642-1-quic_sartgarg@xxxxxxxxxxx > --- > drivers/mmc/host/sdhci-msm.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index e00208535bd1..e3444d223513 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -2627,6 +2627,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) > } > > msm_host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY; > + msm_host->mmc->caps |= MMC_CAP_AGGRESSIVE_PM; > > /* Set the timeout value to max possible */ > host->max_timeout_count = 0xF; > -- > 2.34.1 > -- With best wishes Dmitry
