On Fri, Nov 22, 2024 at 01:35:28PM +0100, Krzysztof Kozlowski wrote:
> On 22/11/2024 09:40, Yuanjie Yang wrote:
> > On Fri, Nov 22, 2024 at 08:04:31AM +0100, Krzysztof Kozlowski wrote:
> >> On 22/11/2024 07:51, Yuanjie Yang wrote:
> >>> Add SDHC1 and SDHC2 support to the QCS615 Ride platform.
> >>>
> >>> Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
> >>> ---
> >>> arch/arm64/boot/dts/qcom/qcs615.dtsi | 198 +++++++++++++++++++++++++++
> >>> 1 file changed, 198 insertions(+)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> >>> index 590beb37f441..37c6ab217c96 100644
> >>> --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
> >>> +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> >>> @@ -399,6 +399,65 @@ qfprom: efuse@780000 {
> >>> #size-cells = <1>;
> >>> };
> >>>
> >>> + sdhc_1: mmc@7c4000 {
> >>> + compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
> >>> + reg = <0x0 0x007c4000 0x0 0x1000>,
> >>> + <0x0 0x007c5000 0x0 0x1000>;
> >>> + reg-names = "hc",
> >>> + "cqhci";
> >>> +
> >>> + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
> >>> + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
> >>> + interrupt-names = "hc_irq",
> >>> + "pwr_irq";
> >>> +
> >>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> >>> + <&gcc GCC_SDCC1_APPS_CLK>,
> >>> + <&rpmhcc RPMH_CXO_CLK>,
> >>> + <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> >>> + clock-names = "iface",
> >>> + "core",
> >>> + "xo",
> >>> + "ice";
> >>> +
> >>> + resets = <&gcc GCC_SDCC1_BCR>;
> >>> +
> >>> + power-domains = <&rpmhpd RPMHPD_CX>;
> >>> + operating-points-v2 = <&sdhc1_opp_table>;
> >>> + iommus = <&apps_smmu 0x02c0 0x0>;
> >>> + interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
> >>> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> >>> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> >>> + &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ALWAYS>;
> >>> + interconnect-names = "sdhc-ddr",
> >>> + "cpu-sdhc";
> >>> +
> >>> + bus-width = <8>;
> >>> + qcom,dll-config = <0x000f642c>;
> >>> + qcom,ddr-config = <0x80040868>;
> >>> + supports-cqe;
> >>> + dma-coherent;
> >>> + mmc-ddr-1_8v;
> >>> + mmc-hs200-1_8v;
> >>> + mmc-hs400-1_8v;
> >>> + mmc-hs400-enhanced-strobe;
> >>
> >> These are properties of memory, not SoC. If the node is disabled, means
> >> memory is not attached to the SoC, right?
> >>
> >>> + status = "disabled";
> > Thanks, I think qcom,dll-config and qcom,ddr-config are properties of Soc,
> > they are memory configurations that need to be written to the ioaddr.
> > And mmc-ddr-1_8v,mmc-hs200-1_8v,mmc-hs400-1_8v are bus speed config,
> > they indicate the bus speed at which the host contoller can operate.
> > If the node is disabled, which means Soc don't support these properties.
> No, that is not the meaning of node is disabled. When node is disabled,
> it means board does not have attached memory.
>
> Move the memory related properties to the board.
Thanks, Ok I understand, I will move the memory related
properties(qcom,dll-config and qcom,ddr-config) to the
board dts in next version.
> Best regards,
> Krzysztof
Thanks,
Yuanjie
