> >
> > If card detection is done via polling, due to broken-cd (Freescale LX2160,
> etc.), or for other reasons, then the card will be polled asynchronously and
> periodically.
> >
> > If that polling happens after the card has been put in powered off state (i.e.
> during system shutdown/reboot), then the polling times out. That timeout is
> of a long duration (10s). And it is repeated multiple times (x3). And that is all
> done after the watchdogd has been disabled, meaning that system watchdogs
> are not being kicked.
> >
> > If the MMC polling exceeds the watchdog trip time, then the system will be
> ungraciously reset. Or in the case of a pretimeout capable watchdog, the
> pretimeout will trip unnecessarily.
> >
> > [ 46.872767] mmc_mrq_pr_debug:274: mmc1: starting CMD6 arg
> 03220301 flags 0000049d
> > [ 46.880258] sdhci_irq:3558: mmc1: sdhci: IRQ status 0x00000001
> > [ 46.886082] sdhci_irq:3558: mmc1: sdhci: IRQ status 0x00000002
> > [ 46.891906] mmc_request_done:187: mmc1: req done (CMD6): 0:
> 00000800 00000000 00000000 00000000
> > [ 46.900606] mmc_set_ios:892: mmc1: clock 0Hz busmode 2
> powermode 0 cs 0 Vdd 0 width 1 timing 0
> > [ 46.914934] mmc_mrq_pr_debug:274: mmc1: starting CMD13 arg
> 00010000 flags 00000195
> > [ 57.433351] mmc1: Timeout waiting for hardware cmd interrupt.
>
> Hmm. How is the polling being done? By using MMC_CAP_NEEDS_POLL?
>
Correct. (At least in my understanding.) 'broken-cd' in the device tree will trigger
MMC_CAP_NEEDS_POLL to be set.
> The above certainly looks weird. The mmc_rescan work should not be
> allowed to run at this point, as the work is getting punted to the
> system_freezable_wq via mmc_schedule_delayed_work().
>
This is the backtrace I get when the timeout occurs:
[ 46.154348] mmc_mrq_pr_debug:274: mmc1: starting CMD13 arg 00010000 flags 00000195
[ 46.161917] sdhci_irq:3546: mmc1: sdhci: IRQ status 0x00000001
[ 46.167743] mmc_request_done:187: mmc1: req done (CMD13): 0: 00000900 00000000 00000000 00000000
[ 46.176526] mmc_mrq_pr_debug:274: mmc1: starting CMD6 arg 03220301 flags 0000049d
[ 46.184016] sdhci_irq:3546: mmc1: sdhci: IRQ status 0x00000001
[ 46.189840] sdhci_irq:3546: mmc1: sdhci: IRQ status 0x00000002
[ 46.195665] mmc_request_done:187: mmc1: req done (CMD6): 0: 00000800 00000000 00000000 00000000
[ 46.204362] mmc_set_ios:892: mmc1: clock 0Hz busmode 2 powermode 0 cs 0 Vdd 0 width 1 timing 0
[ 46.219307] CPU: 6 PID: 153 Comm: kworker/6:1 Tainted: G O 6.6.59 #1
[ 46.231988] Hardware name: [Redacted]
[ 46.238678] Workqueue: events_freezable mmc_rescan
[ 46.243466] Call trace:
[ 46.245901] dump_backtrace+0x9c/0x128
[ 46.249643] show_stack+0x20/0x38
[ 46.252948] dump_stack_lvl+0x48/0x60
[ 46.256603] dump_stack+0x18/0x28
[ 46.259909] mmc_alive+0x74/0x88
[ 46.263128] _mmc_detect_card_removed+0x3c/0x158
[ 46.267735] mmc_detect+0x30/0x98
[ 46.271040] mmc_rescan+0x94/0x238
[ 46.274432] process_one_work+0x178/0x3d8
[ 46.278432] worker_thread+0x2bc/0x3e0
[ 46.282171] kthread+0xf8/0x110
[ 46.285303] ret_from_fork+0x10/0x20
[ 46.288878] mmc_mrq_pr_debug:274: mmc1: starting CMD13 arg 00010000 flags 00000195
[ 56.793379] mmc1: Timeout waiting for hardware cmd interrupt.
[ 56.799116] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 56.805545] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00002202
...
> > ...
> > [ 71.031911] [Redacted] 2030000.i2c:[Redacted]@41:watchdog:
> Watchdog interrupt received!
> > [ 71.039737] Kernel panic - not syncing: watchdog pretimeout event
> > [ 71.045820] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O
> 6.6.59 #1
> > [ 71.053207] Hardware name: [Redacted]
> > [ 71.059897] Call trace:
> > [ 71.062332] dump_backtrace+0x9c/0x128
> > ...
> >
> > CMD6 is SWITCH_FUNC and arg 03220301 is POWER_OFF_NOTIFICATION
> (bits 16:23 = 0x22 = 34).
> > CMD13 is SEND_STATUS, and when it occurs after the
> POWER_OFF_NOTIFICATION (as above) bad things happen.
> >
> > I have made the following change to attempt to work around the issue, and
> it seems to hold up, but is also quite brute force:
> >
> > --- a/drivers/mmc/core/mmc.c
> > +++ b/drivers/mmc/core/mmc.c
> > @@ -2046,6 +2046,11 @@ static void mmc_remove(struct mmc_host *host)
> > */
> > static int mmc_alive(struct mmc_host *host) {
> > + if (host->card && mmc_card_suspended(host->card)) {
> > + pr_err("%s: Skip card detection: Card suspended\n",
> > + mmc_hostname(host));
> > + return -ENOMEDIUM;
> > + }
> > return mmc_send_status(host->card, NULL); }
>
> Yeah, the above isn't really the correct solution in my opinion.
>
> We need to prevent the mmc_rescan work from running, which I thought we
> already did...
>
> >
> > Anthony
> >
> >
>
> Kind regards
> Uffe
