Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and
use an RPMB device via the RPMB subsystem instead of passing the RPMB
frames via tee-supplicant in user space. A fallback mechanism is kept to
route RPMB frames via tee-supplicant if the RPMB subsystem isn't
available.
The OP-TEE RPC ABI is extended to support iterating over all RPMB
devices until one is found with the expected RPMB key already
programmed.
Signed-off-by: Jens Wiklander <jens.wiklander@xxxxxxxxxx>
Tested-by: Manuel Traut <manut@xxxxxxxxx>
---
Documentation/ABI/testing/sysfs-class-tee | 15 ++
MAINTAINERS | 1 +
drivers/tee/optee/core.c | 96 +++++++++++-
drivers/tee/optee/device.c | 7 +
drivers/tee/optee/ffa_abi.c | 14 ++
drivers/tee/optee/optee_ffa.h | 2 +
drivers/tee/optee/optee_private.h | 26 +++-
drivers/tee/optee/optee_rpc_cmd.h | 35 +++++
drivers/tee/optee/optee_smc.h | 2 +
drivers/tee/optee/rpc.c | 177 ++++++++++++++++++++++
drivers/tee/optee/smc_abi.c | 14 ++
11 files changed, 387 insertions(+), 2 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-tee
diff --git a/Documentation/ABI/testing/sysfs-class-tee b/Documentation/ABI/testing/sysfs-class-tee
new file mode 100644
index 000000000000..c9144d16003e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-tee
@@ -0,0 +1,15 @@
+What: /sys/class/tee/tee{,priv}X/rpmb_routing_model
+Date: May 2024
+KernelVersion: 6.10
+Contact: op-tee@xxxxxxxxxxxxxxxxxxxxxxxxx
+Description:
+ RPMB frames can be routed to the RPMB device via the
+ user-space daemon tee-supplicant or the RPMB subsystem
+ in the kernel. The value "user" means that the driver
+ will route the RPMB frames via user space. Conversely,
+ "kernel" means that the frames are routed via the RPMB
+ subsystem without assistance from tee-supplicant. It
+ should be assumed that RPMB frames are routed via user
+ space if the variable is absent. The primary purpose
+ of this variable is to let systemd know whether
+ tee-supplicant is needed in the early boot with initramfs.
diff --git a/MAINTAINERS b/MAINTAINERS
index 716011964b18..d692417edab1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22433,6 +22433,7 @@ M: Jens Wiklander <jens.wiklander@xxxxxxxxxx>
R: Sumit Garg <sumit.garg@xxxxxxxxxx>
L: op-tee@xxxxxxxxxxxxxxxxxxxxxxxxx
S: Maintained
+F: Documentation/ABI/testing/sysfs-class-tee
F: Documentation/driver-api/tee.rst
F: Documentation/tee/
F: Documentation/userspace-api/tee.rst
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 39e688d4e974..935f3fff9046 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -10,17 +10,85 @@
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/rpmb.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/tee_core.h>
#include <linux/types.h>
#include "optee_private.h"
+struct blocking_notifier_head optee_rpmb_intf_added =
+ BLOCKING_NOTIFIER_INIT(optee_rpmb_intf_added);
+
+static int rpmb_add_dev(struct device *dev)
+{
+ blocking_notifier_call_chain(&optee_rpmb_intf_added, 0,
+ to_rpmb_dev(dev));
+
+ return 0;
+}
+
+static struct class_interface rpmb_class_intf = {
+ .add_dev = rpmb_add_dev,
+};
+
+void optee_bus_scan_rpmb(struct work_struct *work)
+{
+ struct optee *optee = container_of(work, struct optee,
+ rpmb_scan_bus_work);
+ int ret;
+
+ if (!optee->rpmb_scan_bus_done) {
+ ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB);
+ optee->rpmb_scan_bus_done = !ret;
+ if (ret && ret != -ENODEV)
+ pr_info("Scanning for RPMB device: ret %d\n", ret);
+ }
+}
+
+int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
+ void *data)
+{
+ struct optee *optee = container_of(intf, struct optee, rpmb_intf);
+
+ schedule_work(&optee->rpmb_scan_bus_work);
+
+ return 0;
+}
+
static void optee_bus_scan(struct work_struct *work)
{
WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP));
}
+static ssize_t rpmb_routing_model_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct optee *optee = dev_get_drvdata(dev);
+ const char *s;
+
+ if (optee->in_kernel_rpmb_routing)
+ s = "kernel";
+ else
+ s = "user";
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+static DEVICE_ATTR_RO(rpmb_routing_model);
+
+static struct attribute *optee_dev_attrs[] = {
+ &dev_attr_rpmb_routing_model.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(optee_dev);
+
+void optee_set_dev_group(struct optee *optee)
+{
+ tee_device_set_dev_groups(optee->teedev, optee_dev_groups);
+ tee_device_set_dev_groups(optee->supp_teedev, optee_dev_groups);
+}
+
int optee_open(struct tee_context *ctx, bool cap_memref_null)
{
struct optee_context_data *ctxdata;
@@ -97,6 +165,9 @@ void optee_release_supp(struct tee_context *ctx)
void optee_remove_common(struct optee *optee)
{
+ blocking_notifier_chain_unregister(&optee_rpmb_intf_added,
+ &optee->rpmb_intf);
+ cancel_work_sync(&optee->rpmb_scan_bus_work);
/* Unregister OP-TEE specific client devices on TEE bus */
optee_unregister_devices();
@@ -113,13 +184,18 @@ void optee_remove_common(struct optee *optee)
tee_shm_pool_free(optee->pool);
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
+ rpmb_dev_put(optee->rpmb_dev);
+ mutex_destroy(&optee->rpmb_dev_mutex);
}
static int smc_abi_rc;
static int ffa_abi_rc;
+static bool intf_is_regged;
static int __init optee_core_init(void)
{
+ int rc;
+
/*
* The kernel may have crashed at the same time that all available
* secure world threads were suspended and we cannot reschedule the
@@ -130,18 +206,36 @@ static int __init optee_core_init(void)
if (is_kdump_kernel())
return -ENODEV;
+ if (IS_ENABLED(CONFIG_RPMB)) {
+ rc = rpmb_interface_register(&rpmb_class_intf);
+ if (rc)
+ return rc;
+ intf_is_regged = true;
+ }
+
smc_abi_rc = optee_smc_abi_register();
ffa_abi_rc = optee_ffa_abi_register();
/* If both failed there's no point with this module */
- if (smc_abi_rc && ffa_abi_rc)
+ if (smc_abi_rc && ffa_abi_rc) {
+ if (IS_ENABLED(CONFIG_RPMB)) {
+ rpmb_interface_unregister(&rpmb_class_intf);
+ intf_is_regged = false;
+ }
return smc_abi_rc;
+ }
+
return 0;
}
module_init(optee_core_init);
static void __exit optee_core_exit(void)
{
+ if (IS_ENABLED(CONFIG_RPMB) && intf_is_regged) {
+ rpmb_interface_unregister(&rpmb_class_intf);
+ intf_is_regged = false;
+ }
+
if (!smc_abi_rc)
optee_smc_abi_unregister();
if (!ffa_abi_rc)
diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
index d296c70ddfdc..950b4661d5df 100644
--- a/drivers/tee/optee/device.c
+++ b/drivers/tee/optee/device.c
@@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session,
ret = tee_client_invoke_func(ctx, &inv_arg, param);
if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
(inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
+ /*
+ * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting
+ * the list of device TAs that depends on RPMB but a usable
+ * RPMB device isn't found.
+ */
+ if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE)
+ return -ENODEV;
pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
inv_arg.ret);
return -EINVAL;
diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
index 3e73efa51bba..f3af5666bb11 100644
--- a/drivers/tee/optee/ffa_abi.c
+++ b/drivers/tee/optee/ffa_abi.c
@@ -7,6 +7,7 @@
#include <linux/arm_ffa.h>
#include <linux/errno.h>
+#include <linux/rpmb.h>
#include <linux/scatterlist.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -909,6 +910,10 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
optee->ffa.bottom_half_value = U32_MAX;
optee->rpc_param_count = rpc_param_count;
+ if (IS_REACHABLE(CONFIG_RPMB) &&
+ (sec_caps & OPTEE_FFA_SEC_CAP_RPMB_PROBE))
+ optee->in_kernel_rpmb_routing = true;
+
teedev = tee_device_alloc(&optee_ffa_clnt_desc, NULL, optee->pool,
optee);
if (IS_ERR(teedev)) {
@@ -925,6 +930,8 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
}
optee->supp_teedev = teedev;
+ optee_set_dev_group(optee);
+
rc = tee_device_register(optee->teedev);
if (rc)
goto err_unreg_supp_teedev;
@@ -940,6 +947,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
optee_cq_init(&optee->call_queue, 0);
optee_supp_init(&optee->supp);
optee_shm_arg_cache_init(optee, arg_cache_flags);
+ mutex_init(&optee->rpmb_dev_mutex);
ffa_dev_set_drvdata(ffa_dev, optee);
ctx = teedev_open(optee->teedev);
if (IS_ERR(ctx)) {
@@ -961,6 +969,10 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
if (rc)
goto err_unregister_devices;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
+ optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
+ blocking_notifier_chain_register(&optee_rpmb_intf_added,
+ &optee->rpmb_intf);
pr_info("initialized driver\n");
return 0;
@@ -974,6 +986,8 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
teedev_close_context(ctx);
err_rhashtable_free:
rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
+ rpmb_dev_put(optee->rpmb_dev);
+ mutex_destroy(&optee->rpmb_dev_mutex);
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
mutex_destroy(&optee->ffa.mutex);
diff --git a/drivers/tee/optee/optee_ffa.h b/drivers/tee/optee/optee_ffa.h
index 5db779dc00de..257735ae5b56 100644
--- a/drivers/tee/optee/optee_ffa.h
+++ b/drivers/tee/optee/optee_ffa.h
@@ -92,6 +92,8 @@
#define OPTEE_FFA_SEC_CAP_ARG_OFFSET BIT(0)
/* OP-TEE supports asynchronous notification via FF-A */
#define OPTEE_FFA_SEC_CAP_ASYNC_NOTIF BIT(1)
+/* OP-TEE supports probing for RPMB device if needed */
+#define OPTEE_FFA_SEC_CAP_RPMB_PROBE BIT(2)
#define OPTEE_FFA_EXCHANGE_CAPABILITIES OPTEE_FFA_BLOCKING_CALL(2)
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 424898cdc4e9..dc0f355ef72a 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -7,7 +7,9 @@
#define OPTEE_PRIVATE_H
#include <linux/arm-smccc.h>
+#include <linux/notifier.h>
#include <linux/rhashtable.h>
+#include <linux/rpmb.h>
#include <linux/semaphore.h>
#include <linux/tee_core.h>
#include <linux/types.h>
@@ -20,6 +22,7 @@
/* Some Global Platform error codes used in this driver */
#define TEEC_SUCCESS 0x00000000
#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
+#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008
#define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A
#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
@@ -28,6 +31,7 @@
/* API Return Codes are from the GP TEE Internal Core API Specification */
#define TEE_ERROR_TIMEOUT 0xFFFF3001
+#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003
#define TEEC_ORIGIN_COMMS 0x00000002
@@ -200,6 +204,12 @@ struct optee_ops {
* @notif: notification synchronization struct
* @supp: supplicant synchronization struct for RPC to supplicant
* @pool: shared memory pool
+ * @mutex: mutex protecting @rpmb_dev
+ * @rpmb_dev: current RPMB device or NULL
+ * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices
+ * was already done
+ * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus
+ * and register RPMB dependent optee drivers
* @rpc_param_count: If > 0 number of RPC parameters to make room for
* @scan_bus_done flag if device registation was already done.
* @scan_bus_work workq to scan optee bus and register optee drivers
@@ -218,9 +228,16 @@ struct optee {
struct optee_notif notif;
struct optee_supp supp;
struct tee_shm_pool *pool;
+ /* Protects rpmb_dev pointer */
+ struct mutex rpmb_dev_mutex;
+ struct rpmb_dev *rpmb_dev;
+ struct notifier_block rpmb_intf;
unsigned int rpc_param_count;
- bool scan_bus_done;
+ bool scan_bus_done;
+ bool rpmb_scan_bus_done;
+ bool in_kernel_rpmb_routing;
struct work_struct scan_bus_work;
+ struct work_struct rpmb_scan_bus_work;
};
struct optee_session {
@@ -253,6 +270,8 @@ struct optee_call_ctx {
size_t num_entries;
};
+extern struct blocking_notifier_head optee_rpmb_intf_added;
+
int optee_notif_init(struct optee *optee, u_int max_key);
void optee_notif_uninit(struct optee *optee);
int optee_notif_wait(struct optee *optee, u_int key, u32 timeout);
@@ -283,9 +302,14 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
#define PTA_CMD_GET_DEVICES 0x0
#define PTA_CMD_GET_DEVICES_SUPP 0x1
+#define PTA_CMD_GET_DEVICES_RPMB 0x2
int optee_enumerate_devices(u32 func);
void optee_unregister_devices(void);
+void optee_bus_scan_rpmb(struct work_struct *work);
+int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
+ void *data);
+void optee_set_dev_group(struct optee *optee);
void optee_remove_common(struct optee *optee);
int optee_open(struct tee_context *ctx, bool cap_memref_null);
void optee_release(struct tee_context *ctx);
diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h
index 4576751b490c..87a59cc03480 100644
--- a/drivers/tee/optee/optee_rpc_cmd.h
+++ b/drivers/tee/optee/optee_rpc_cmd.h
@@ -104,4 +104,39 @@
/* I2C master control flags */
#define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
+/*
+ * Reset RPMB probing
+ *
+ * Releases an eventually already used RPMB devices and starts over searching
+ * for RPMB devices. Returns the kind of shared memory to use in subsequent
+ * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
+ *
+ * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for
+ * OPTEE_RPC_CMD_SHM_ALLOC
+ */
+#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22
+
+/*
+ * Probe next RPMB device
+ *
+ * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_*
+ * [out] value[0].b EXT CSD-slice 168 "RPMB Size"
+ * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count"
+ * [out] memref[1] Buffer with the raw CID
+ */
+#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23
+
+/* Type of RPMB device */
+#define OPTEE_RPC_RPMB_EMMC 0
+#define OPTEE_RPC_RPMB_UFS 1
+#define OPTEE_RPC_RPMB_NVME 2
+
+/*
+ * Replay Protected Memory Block access
+ *
+ * [in] memref[0] Frames to device
+ * [out] memref[1] Frames from device
+ */
+#define OPTEE_RPC_CMD_RPMB_FRAMES 24
+
#endif /*__OPTEE_RPC_CMD_H*/
diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
index 7d9fa426505b..879426300821 100644
--- a/drivers/tee/optee/optee_smc.h
+++ b/drivers/tee/optee/optee_smc.h
@@ -278,6 +278,8 @@ struct optee_smc_get_shm_config_result {
#define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF BIT(5)
/* Secure world supports pre-allocating RPC arg struct */
#define OPTEE_SMC_SEC_CAP_RPC_ARG BIT(6)
+/* Secure world supports probing for RPMB device if needed */
+#define OPTEE_SMC_SEC_CAP_RPMB_PROBE BIT(7)
#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
#define OPTEE_SMC_EXCHANGE_CAPABILITIES \
diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
index 5de4504665be..a4b49fd1d46d 100644
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -7,6 +7,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/rpmb.h>
#include <linux/slab.h>
#include <linux/tee_core.h>
#include "optee_private.h"
@@ -261,6 +262,154 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m);
}
+static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
+ struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct tee_param params[1];
+
+ if (arg->num_params != ARRAY_SIZE(params) ||
+ optee->ops->from_msg_param(optee, params, arg->num_params,
+ arg->params) ||
+ params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
+ params[0].u.value.b = 0;
+ params[0].u.value.c = 0;
+ if (optee->ops->to_msg_param(optee, arg->params,
+ arg->num_params, params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ mutex_lock(&optee->rpmb_dev_mutex);
+ rpmb_dev_put(optee->rpmb_dev);
+ optee->rpmb_dev = NULL;
+ mutex_unlock(&optee->rpmb_dev_mutex);
+
+ arg->ret = TEEC_SUCCESS;
+}
+
+static int rpmb_type_to_rpc_type(enum rpmb_type rtype)
+{
+ switch (rtype) {
+ case RPMB_TYPE_EMMC:
+ return OPTEE_RPC_RPMB_EMMC;
+ case RPMB_TYPE_UFS:
+ return OPTEE_RPC_RPMB_UFS;
+ case RPMB_TYPE_NVME:
+ return OPTEE_RPC_RPMB_NVME;
+ default:
+ return -1;
+ }
+}
+
+static int rpc_rpmb_match(struct device *dev, const void *data)
+{
+ struct rpmb_dev *rdev = to_rpmb_dev(dev);
+
+ return rpmb_type_to_rpc_type(rdev->descr.type) >= 0;
+}
+
+static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
+ struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct rpmb_dev *rdev;
+ struct tee_param params[2];
+ void *buf;
+
+ if (arg->num_params != ARRAY_SIZE(params) ||
+ optee->ops->from_msg_param(optee, params, arg->num_params,
+ arg->params) ||
+ params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||
+ params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+ buf = tee_shm_get_va(params[1].u.memref.shm,
+ params[1].u.memref.shm_offs);
+ if (!buf) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ mutex_lock(&optee->rpmb_dev_mutex);
+ rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match);
+ rpmb_dev_put(optee->rpmb_dev);
+ optee->rpmb_dev = rdev;
+ mutex_unlock(&optee->rpmb_dev_mutex);
+
+ if (!rdev) {
+ arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;
+ return;
+ }
+
+ if (params[1].u.memref.size < rdev->descr.dev_id_len) {
+ arg->ret = TEEC_ERROR_SHORT_BUFFER;
+ return;
+ }
+ memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len);
+ params[1].u.memref.size = rdev->descr.dev_id_len;
+ params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type);
+ params[0].u.value.b = rdev->descr.capacity;
+ params[0].u.value.c = rdev->descr.reliable_wr_count;
+ if (optee->ops->to_msg_param(optee, arg->params,
+ arg->num_params, params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ arg->ret = TEEC_SUCCESS;
+}
+
+static void handle_rpc_func_rpmb_frames(struct tee_context *ctx,
+ struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct tee_param params[2];
+ struct rpmb_dev *rdev;
+ void *p0, *p1;
+
+ mutex_lock(&optee->rpmb_dev_mutex);
+ rdev = rpmb_dev_get(optee->rpmb_dev);
+ mutex_unlock(&optee->rpmb_dev_mutex);
+ if (!rdev) {
+ arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;
+ return;
+ }
+
+ if (arg->num_params != ARRAY_SIZE(params) ||
+ optee->ops->from_msg_param(optee, params, arg->num_params,
+ arg->params) ||
+ params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT ||
+ params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+
+ p0 = tee_shm_get_va(params[0].u.memref.shm,
+ params[0].u.memref.shm_offs);
+ p1 = tee_shm_get_va(params[1].u.memref.shm,
+ params[1].u.memref.shm_offs);
+ if (rpmb_route_frames(rdev, p0, params[0].u.memref.size, p1,
+ params[1].u.memref.size)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+ if (optee->ops->to_msg_param(optee, arg->params,
+ arg->num_params, params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+ arg->ret = TEEC_SUCCESS;
+out:
+ rpmb_dev_put(rdev);
+}
+
void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
struct optee_msg_arg *arg)
{
@@ -277,6 +426,34 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
case OPTEE_RPC_CMD_I2C_TRANSFER:
handle_rpc_func_cmd_i2c_transfer(ctx, arg);
break;
+ /*
+ * optee->in_kernel_rpmb_routing true means that OP-TEE supports
+ * in-kernel RPMB routing _and_ that the RPMB subsystem is
+ * reachable. This is reported to user space with
+ * rpmb_routing_model=kernel in sysfs.
+ *
+ * rpmb_routing_model=kernel is also a promise to user space that
+ * RPMB access will not require supplicant support, hence the
+ * checks below.
+ */
+ case OPTEE_RPC_CMD_RPMB_PROBE_RESET:
+ if (optee->in_kernel_rpmb_routing)
+ handle_rpc_func_rpmb_probe_reset(ctx, optee, arg);
+ else
+ handle_rpc_supp_cmd(ctx, optee, arg);
+ break;
+ case OPTEE_RPC_CMD_RPMB_PROBE_NEXT:
+ if (optee->in_kernel_rpmb_routing)
+ handle_rpc_func_rpmb_probe_next(ctx, optee, arg);
+ else
+ handle_rpc_supp_cmd(ctx, optee, arg);
+ break;
+ case OPTEE_RPC_CMD_RPMB_FRAMES:
+ if (optee->in_kernel_rpmb_routing)
+ handle_rpc_func_rpmb_frames(ctx, optee, arg);
+ else
+ handle_rpc_supp_cmd(ctx, optee, arg);
+ break;
default:
handle_rpc_supp_cmd(ctx, optee, arg);
}
diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
index 844285d4f03c..e9456e3e74cc 100644
--- a/drivers/tee/optee/smc_abi.c
+++ b/drivers/tee/optee/smc_abi.c
@@ -20,6 +20,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/rpmb.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -1685,6 +1686,10 @@ static int optee_probe(struct platform_device *pdev)
optee->smc.sec_caps = sec_caps;
optee->rpc_param_count = rpc_param_count;
+ if (IS_REACHABLE(CONFIG_RPMB) &&
+ (sec_caps & OPTEE_SMC_SEC_CAP_RPMB_PROBE))
+ optee->in_kernel_rpmb_routing = true;
+
teedev = tee_device_alloc(&optee_clnt_desc, NULL, pool, optee);
if (IS_ERR(teedev)) {
rc = PTR_ERR(teedev);
@@ -1699,6 +1704,8 @@ static int optee_probe(struct platform_device *pdev)
}
optee->supp_teedev = teedev;
+ optee_set_dev_group(optee);
+
rc = tee_device_register(optee->teedev);
if (rc)
goto err_unreg_supp_teedev;
@@ -1712,6 +1719,7 @@ static int optee_probe(struct platform_device *pdev)
optee->smc.memremaped_shm = memremaped_shm;
optee->pool = pool;
optee_shm_arg_cache_init(optee, arg_cache_flags);
+ mutex_init(&optee->rpmb_dev_mutex);
platform_set_drvdata(pdev, optee);
ctx = teedev_open(optee->teedev);
@@ -1766,6 +1774,10 @@ static int optee_probe(struct platform_device *pdev)
if (rc)
goto err_disable_shm_cache;
+ INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
+ optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
+ blocking_notifier_chain_register(&optee_rpmb_intf_added,
+ &optee->rpmb_intf);
pr_info("initialized driver\n");
return 0;
@@ -1779,6 +1791,8 @@ static int optee_probe(struct platform_device *pdev)
err_close_ctx:
teedev_close_context(ctx);
err_supp_uninit:
+ rpmb_dev_put(optee->rpmb_dev);
+ mutex_destroy(&optee->rpmb_dev_mutex);
optee_shm_arg_cache_uninit(optee);
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
--
2.34.1
