* Adam Ford <aford173@xxxxxxxxx> [240212 13:24]: > On Mon, Feb 12, 2024 at 1:28 AM Tony Lindgren <tony@xxxxxxxxxxx> wrote: > > > > * Adam Ford <aford173@xxxxxxxxx> [240208 12:57]: > > > I was testing the newer MMC driver on an AM3517 a few months ago, and > > > I noticed that SD cards were returning weird or empty data after some > > > indeterminate amount of time. If I read the IOS file immediately > > > after boot, it worked. If I forced some sort of file IO, it might > > > work, but after it went idle, it appeared to have strange data. I > > > don't think this bug is limited to one platform. > > > > OK interesting. So the zero values for ios are expected when the card > > is idle. What do you mean by weird values when idle? > > I meant zero-values when I said weird. It's weird to me, because > other platforms don't return zero. > If tha's normal, I'll likely submit an update to omap3.dtsi to migrate > the MMC driver to the newer one. > I'd been meaning to do that for a while, but this threw me off, then i > forgot about it until I saw this thread. Yes I'd like to enable sdhci-omap and deprecate omap_hsmmc too. Assuming no issues and if the hs200 issue is a separate issue, maybe post the patches and then let's get some Tested-by for them before we put them into Linux next. > > Can you please try catch the weird values or a failure maybe with > > something like: > > > > while true; do > > cat /sys/kernel/debug/mmc0/ios > > fdisk -l /dev/mmcblk0 > > cat /sys/kernel/debug/mmc0/ios > > sleep 20 > > done > > It appears the first time, that runs after fdisk, the values seems > reasonable, but subsequent iterations, the values are zero again: Seems expected to me. Before fdisk -l the mmc controller may have autoidled showing mostly zero values, and after any access to the mmc card the card is enabled and the values are the normal enabled values. If, however, fdisk -l does not work, or the values right after fdisk -l are mostly zero, then that would indicate a problem. I guess leaving out the reading of ios before fdisk -l would make it easier to see. Regards, Tony
