On 10/11/2023 06:41, Drew Fustini wrote:
> Add node for the SDHCI fixed clock. Add mmc0 node for the first mmc
> controller instance which is typically connected to the eMMC device.
> Add mmc1 node for the second mmc controller instance which is typically
> connected to microSD slot.
>
> Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxx>
> ---
> arch/riscv/boot/dts/thead/th1520.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index ff364709a6df..f5ec9326c4b8 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -134,6 +134,13 @@ uart_sclk: uart-sclk-clock {
> #clock-cells = <0>;
> };
>
> + sdhci_clk: sdhci-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <198000000>;
> + clock-output-names = "sdhci_clk";
> + #clock-cells = <0>;
> + };
> +
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&plic>;
> @@ -292,6 +299,22 @@ dmac0: dma-controller@ffefc00000 {
> status = "disabled";
> };
>
> + mmc0: mmc@ffe7080000 {
> + compatible = "thead,th1520-dwcmshc";
> + reg = <0xff 0xe7080000 0x0 0x10000>;
> + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sdhci_clk>;
> + clock-names = "core";
You miss disable in each mmc node.
Best regards,
Krzysztof
