Re: [PATCH V5 18/26] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Adrian

On Wed, Nov 2, 2022 at 1:15 AM Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 19/10/22 14:06, Victor Shih wrote:
> > This is a sdhci version of mmc's uhs2_set_reg operation.
> > UHS-II interface (related registers) will be initialised here.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> > Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/mmc/host/sdhci-uhs2.c | 103 ++++++++++++++++++++++++++++++++++
> >  drivers/mmc/host/sdhci.c      |  12 ++++
> >  drivers/mmc/host/sdhci.h      |   1 +
> >  3 files changed, 116 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index afaca5d96938..c9d59b8ac37f 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -350,6 +350,53 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> >       spin_unlock_irqrestore(&host->lock, flags);
> >  }
> >
> > +static void sdhci_uhs2_set_config(struct sdhci_host *host)
> > +{
> > +     u32 value;
> > +     u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
> > +     u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
> > +     u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
> > +     u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
> > +     u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);
> > +
> > +     /* Set Gen Settings */
> > +     sdhci_writel(host, host->mmc->uhs2_caps.n_lanes_set <<
> > +             SDHCI_UHS2_GEN_SET_N_LANES_POS, sdhci_uhs2_gen_set_reg);
> > +
> > +     /* Set PHY Settings */
> > +     value = (host->mmc->uhs2_caps.n_lss_dir_set <<
> > +                     SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS) |
> > +             (host->mmc->uhs2_caps.n_lss_sync_set <<
> > +                     SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS);
> > +     if (host->mmc->flags & MMC_UHS2_SPEED_B)
> > +             value |= 1 << SDHCI_UHS2_PHY_SET_SPEED_POS;
> > +     sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
> > +
> > +     /* Set LINK-TRAN Settings */
> > +     value = (host->mmc->uhs2_caps.max_retry_set <<
> > +                     SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS) |
> > +             (host->mmc->uhs2_caps.n_fcu_set <<
> > +                     SDHCI_UHS2_TRAN_SET_N_FCU_POS);
> > +     sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
> > +     sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set,
> > +                  sdhci_uhs2_tran_set_1_reg);
> > +}
> > +
> > +static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
> > +{
> > +     u32 val;
> > +     /* 100ms */
> > +     int timeout = 100000;
> > +
> > +     if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE),
> > +                                  100, timeout, true, host, SDHCI_PRESENT_STATE)) {
> > +             pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc));
> > +             sdhci_dumpregs(host);
> > +             return -EIO;
> > +     }
> > +     return 0;
> > +}
> > +
> >  /*****************************************************************************\
> >   *                                                                           *
> >   * MMC callbacks                                                             *
> > @@ -435,6 +482,61 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc)
> >       return 0;
> >  }
> >
> > +static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc);
> > +
> > +static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
> > +{
> > +     struct sdhci_host *host = mmc_priv(mmc);
> > +     unsigned long flags;
> > +     int err = 0;
> > +     u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
> > +     u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
> > +
> > +     DBG("Begin %s, act %d.\n", __func__, op);
>
> DBG already has __func__.  Please also check other DBG that
> have duplicate __func__
>

I will update it in the patch#17 of the new [PATCH V6].

> > +
> > +     spin_lock_irqsave(&host->lock, flags);
>
> This all relates to initialization or reinitialization, so I suspect
> the spinlock is not needed here.  What could it be racing with?
>

I will delete it and update it in the patch#17 of the new [PATCH V6].

> > +
> > +     switch (op) {
> > +     case UHS2_PHY_INIT:
> > +             err = sdhci_uhs2_do_detect_init(mmc);
> > +             break;
> > +     case UHS2_SET_CONFIG:
> > +             sdhci_uhs2_set_config(host);
> > +             break;
> > +     case UHS2_ENABLE_INT:
> > +             sdhci_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
> > +             break;
> > +     case UHS2_DISABLE_INT:
> > +             sdhci_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
> > +             break;
> > +     case UHS2_SET_SPEED_B:
> > +             sdhci_writeb(host, 1 << SDHCI_UHS2_PHY_SET_SPEED_POS,
> > +                          sdhci_uhs2_phy_set_reg);
> > +             break;
> > +     case UHS2_CHECK_DORMANT:
> > +             err = sdhci_uhs2_check_dormant(host);
> > +             break;
> > +     case UHS2_DISABLE_CLK:
> > +             err = sdhci_uhs2_disable_clk(mmc);
> > +             break;
> > +     case UHS2_ENABLE_CLK:
> > +             err = sdhci_uhs2_enable_clk(mmc);
> > +             break;
> > +     case UHS2_POST_ATTACH_SD:
> > +             host->ops->uhs2_post_attach_sd(host);
> > +             break;
> > +     default:
> > +             pr_err("%s: input sd uhs2 operation %d is wrong!\n",
> > +                    mmc_hostname(host->mmc), op);
> > +             err = -EIO;
> > +             break;
> > +     }
> > +
> > +     spin_unlock_irqrestore(&host->lock, flags);
> > +
> > +     return err;
> > +}
> > +
> >  /*****************************************************************************\
> >   *                                                                           *
> >   * Driver init/exit                                                          *
> > @@ -589,6 +691,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> >       host->mmc_host_ops.start_signal_voltage_switch =
> >               sdhci_uhs2_start_signal_voltage_switch;
> >       host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios;
> > +     host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
> >
> >       if (!host->mmc_host_ops.uhs2_detect_init)
> >               host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init;
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index de47c71995fb..b9db2e976010 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -236,6 +236,18 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
> >  }
> >  EXPORT_SYMBOL_GPL(sdhci_reset);
> >
> > +void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
> > +{
> > +     u32 ier;
> > +
> > +     ier = sdhci_readl(host, SDHCI_INT_ENABLE);
> > +     ier &= ~clear;
> > +     ier |= set;
> > +     sdhci_writel(host, ier, SDHCI_INT_ENABLE);
> > +     sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_clear_set_irqs);
>
> This might as well be in sdhci-uhs2.c since that is the only
> place that calls it.  Then there is no need to export it.
>

I will update it in the patch#17 of the new [PATCH V6].

> > +
> >  static bool sdhci_do_reset(struct sdhci_host *host, u8 mask)
> >  {
> >       if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index 22d7f47862ae..f049331bd0bc 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -869,6 +869,7 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
> >  int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
> >  void sdhci_set_bus_width(struct sdhci_host *host, int width);
> >  void sdhci_reset(struct sdhci_host *host, u8 mask);
> > +void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
> >  void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> >  int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
> >  void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
>

Thanks, Victor Shih



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux