From: ChanWoo Lee <cw9316.lee@xxxxxxxxxxx>
SD_ROCR_S18A is already defined
and is used to check the rocr value as shown below.
So, replace with already defined values for readability.
--------------------------------------------------
/sd.h
.#define SD_OCR_S18R (1 << 24) /* 1.8V switching request */
.#define SD_ROCR_S18A SD_OCR_S18R /* 1.8V switching accepted by card */
/sd.c
static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
struct mmc_card *oldcard)
{
...
if (rocr & SD_ROCR_S18A && mmc_host_uhs(host)) {
err = mmc_sd_init_uhs_card(card);
}
-------------------------------------------------
Signed-off-by: ChanWoo Lee <cw9316.lee@xxxxxxxxxxx>
---
drivers/mmc/core/sd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c5f1df6ce4c0..d2023837dd72 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -870,7 +870,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
* the CCS bit is set as well. We deliberately deviate from the spec in
* regards to this, which allows UHS-I to be supported for SDSC cards.
*/
- if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
+ if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
err = mmc_set_uhs_voltage(host, pocr);
if (err == -EAGAIN) {
retries--;
--
2.29.0
