On 21/04/22 21:28, Kamal Dasu wrote:
> From: Al Cooper <alcooperx@xxxxxxxxx>
>
> The 72116B0 has improved SDIO controllers that allow the max clock
> rate to be increased from a max of 100MHz to a max of 150MHz. The
> driver will need to get the clock and increase it's default rate
> and override the caps register, that still indicates a max of 100MHz.
> The new clock will be named "sdio_freq" in the DT node's "clock-names"
> list. The driver will use a DT property, "clock-frequency", to
> enable this functionality and will get the actual rate in MHz
> from the property to allow various speeds to be requested.
>
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
> Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-brcmstb.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
> index d5cb3e8978b2..4f3629a8e70a 100644
> --- a/drivers/mmc/host/sdhci-brcmstb.c
> +++ b/drivers/mmc/host/sdhci-brcmstb.c
> @@ -250,6 +250,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
> struct sdhci_pltfm_host *pltfm_host;
> const struct of_device_id *match;
> struct sdhci_brcmstb_priv *priv;
> + uint32_t base_clock_hz = 0;
Prefer u32 i.e. uint32_t -> u32
> struct sdhci_host *host;
> struct resource *iomem;
> struct clk *clk;
> @@ -330,6 +331,30 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
> if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT)
> host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
>
> + /* Change the base clock frequency if the DT property exists */
> + if (device_property_read_u32(&pdev->dev, "clock-frequency",
> + &base_clock_hz) == 0) {
> + struct clk *master_clk;
> + u32 actual_clock_mhz;
> +
> + master_clk = devm_clk_get(&pdev->dev, "sdio_freq");
> + if (IS_ERR(master_clk)) {
> + dev_warn(&pdev->dev,
> + "Clock for \"sdio_freq\" was not found\n");
> + } else {
> + clk_set_rate(master_clk, base_clock_hz);
> + actual_clock_mhz = clk_get_rate(master_clk) / 1000000;
> +
> + host->caps &= ~SDHCI_CLOCK_V3_BASE_MASK;
> + host->caps |=
> + (actual_clock_mhz << SDHCI_CLOCK_BASE_SHIFT);
> + /* Disable presets because they are now incorrect */
> + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> + dev_dbg(&pdev->dev,
> + "Base Clock Frequency changed to %dMHz\n",
> + actual_clock_mhz);
> + }
> + }
> res = sdhci_brcmstb_add_host(host, priv);
> if (res)
> goto err;
