Re: [PATCH 3/5] mmc: sdhci-brcmstb: Enable Clock Gating to save power

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/04/22 21:28, Kamal Dasu wrote:
> From: Al Cooper <alcooperx@xxxxxxxxx>
> 
> Enabling this feature will allow the controller to stop the bus
> clock when the bus is idle. The feature is not part of the standard
> and is unique to newer Arasan cores and is enabled with a bit in a
> vendor specific register. This feature will only be enabled for
> non-removable devices because they don't switch the voltage and
> clock gating breaks SD Card volatge switching.
> 
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
> Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>

Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

> ---
>  drivers/mmc/host/sdhci-brcmstb.c | 35 +++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
> index f32aa045c26d..d5cb3e8978b2 100644
> --- a/drivers/mmc/host/sdhci-brcmstb.c
> +++ b/drivers/mmc/host/sdhci-brcmstb.c
> @@ -17,11 +17,14 @@
>  
>  #define SDHCI_VENDOR 0x78
>  #define  SDHCI_VENDOR_ENHANCED_STRB 0x1
> +#define  SDHCI_VENDOR_GATE_SDCLK_EN 0x2
>  
>  #define BRCMSTB_MATCH_FLAGS_NO_64BIT		BIT(0)
>  #define BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT	BIT(1)
> +#define BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE	BIT(2)
>  
>  #define BRCMSTB_PRIV_FLAGS_HAS_CQE		BIT(0)
> +#define BRCMSTB_PRIV_FLAGS_GATE_CLOCK		BIT(1)
>  
>  #define SDHCI_ARASAN_CQE_BASE_ADDR		0x200
>  
> @@ -36,6 +39,27 @@ struct brcmstb_match_priv {
>  	const unsigned int flags;
>  };
>  
> +static inline void enable_clock_gating(struct sdhci_host *host)
> +{
> +	u32 reg;
> +
> +	reg = sdhci_readl(host, SDHCI_VENDOR);
> +	reg |= SDHCI_VENDOR_GATE_SDCLK_EN;
> +	sdhci_writel(host, reg, SDHCI_VENDOR);
> +}
> +
> +void brcmstb_reset(struct sdhci_host *host, u8 mask)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	sdhci_reset(host, mask);
> +
> +	/* Reset will clear this, so re-enable it */
> +	if (priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK)
> +		enable_clock_gating(host);
> +}
> +
>  static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios)
>  {
>  	struct sdhci_host *host = mmc_priv(mmc);
> @@ -131,7 +155,7 @@ static struct sdhci_ops sdhci_brcmstb_ops = {
>  static struct sdhci_ops sdhci_brcmstb_ops_7216 = {
>  	.set_clock = sdhci_brcmstb_set_clock,
>  	.set_bus_width = sdhci_set_bus_width,
> -	.reset = sdhci_reset,
> +	.reset = brcmstb_reset,
>  	.set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
>  };
>  
> @@ -147,6 +171,7 @@ static struct brcmstb_match_priv match_priv_7445 = {
>  };
>  
>  static const struct brcmstb_match_priv match_priv_7216 = {
> +	.flags = BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE,
>  	.hs400es = sdhci_brcmstb_hs400es,
>  	.ops = &sdhci_brcmstb_ops_7216,
>  };
> @@ -273,6 +298,14 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
>  	if (res)
>  		goto err;
>  
> +	/*
> +	 * Automatic clock gating does not work for SD cards that may
> +	 * voltage switch so only enable it for non-removable devices.
> +	 */
> +	if ((match_priv->flags & BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE) &&
> +	    (host->mmc->caps & MMC_CAP_NONREMOVABLE))
> +		priv->flags |= BRCMSTB_PRIV_FLAGS_GATE_CLOCK;
> +
>  	/*
>  	 * If the chip has enhanced strobe and it's enabled, add
>  	 * callback




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux