Add documentation for binding that specifies the delay that should
be introduced b/w reset and power lines when powering up the device.
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
index e0169a285aa2..4b1e89750e94 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -23,6 +23,10 @@ properties:
description:
contains a reset GPIO specifier with the default active state
+ reset-power-delay-ms:
+ description:
+ Delay in ms between powerdown and reset gpios
+
required:
- compatible
- powerdown-gpios
--
2.25.1
