Hi,
This series adds support for selecting the delay b/w reset and power
lines on pwrseq-sd8787. With this the driver could also be used by
other devices (e.g. WILC1000/WILC3000 which needs a delay of 5ms). Along
with this added the DT bindings for WILC3000 device present on
SAMA5D27 WLSOM1 board.
Thank you,
Claudiu Beznea
Claudiu Beznea (3):
dt-bindings: mmc: pwrseq-sd8787: add binding for delay b/w reset and
power
mmc: pwrseq: sd8787: add support for specifying the delay b/w power
and reset
mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
Eugen Hristev (1):
ARM: dts: at91: sama5d27_wlsom1: add wifi device
.../bindings/mmc/mmc-pwrseq-sd8787.yaml | 4 ++
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 72 +++++++++++++++++++
drivers/mmc/core/Kconfig | 2 +-
drivers/mmc/core/pwrseq_sd8787.c | 11 ++-
4 files changed, 87 insertions(+), 2 deletions(-)
--
2.25.1
