A UHS setting of SDR25 can give better results for High Speed mode.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v5.4+
---
drivers/mmc/host/sdhci-pci-core.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 23da7f7fe093..9552708846ca 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -665,6 +665,15 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
}
}
+static void sdhci_intel_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ /* Set UHS timing to SDR25 for High Speed mode */
+ if (timing == MMC_TIMING_MMC_HS || timing == MMC_TIMING_SD_HS)
+ timing = MMC_TIMING_UHS_SDR25;
+ sdhci_set_uhs_signaling(host, timing);
+}
+
#define INTEL_HS400_ES_REG 0x78
#define INTEL_HS400_ES_BIT BIT(0)
@@ -721,7 +730,7 @@ static const struct sdhci_ops sdhci_intel_byt_ops = {
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = sdhci_intel_set_uhs_signaling,
.hw_reset = sdhci_pci_hw_reset,
};
@@ -731,7 +740,7 @@ static const struct sdhci_ops sdhci_intel_glk_ops = {
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_cqhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = sdhci_intel_set_uhs_signaling,
.hw_reset = sdhci_pci_hw_reset,
.irq = sdhci_cqhci_irq,
};
--
2.17.1
