Hi Philipp, On Thu, 22 Oct 2020 at 00:10, Philip Rinn <rinni@xxxxxxxxxxxxx> wrote: > > Hi, > > the Olimex A64-OLinuXino board comes in various variants, three with eMMC. > While MMC HS-DDR mode works fine on one of them (A64-OLinuXino-1Ge4GW) it > doesn't work on the A64-OLinuXino-2Ge8G-IND variant (I don't have the > third variant so I can't check if it works there). We got similar situations for Allwinner H6 (Beelink GS1 and Tanix TX6). There is definitely an issue in the MMC sunxi driver with HS-DDR mode and it's not limited to "olimex,a64-olinuxino-emmc". Have a look at this this message posted by Jernej: https://www.spinics.net/lists/arm-kernel/msg846093.html I think we should disable the HS-DDR mode for A64 / H6 like it's done for H5 and not disable board per board until the issue is resolved. If you want to disable only for your board you can set in your device-tree: mmc-hs200-1_8v; This will switch to HS200 mode without using the HS-DDR mode. Regards, Clement > > Disabling MMC HS-DDR mode fixes the problem. This is also what Olimex does > for their kernel: > > https://github.com/OLIMEX/linux-olimex/commit/eef0e814e74f.patch > > Mainline kernel doesn't differentiate between the different variants with > eMMC so I'm disabling HS-DDR mode for all of them as done for the H5 eMMC > controller. > > Disable HS-DDR mode for Olimex A64-OLinuXino variants with eMMC > > Signed-off-by: Philip Rinn <rinni@xxxxxxxxxxxxx> > > --- > drivers/mmc/host/sunxi-mmc.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c > index fc62773602ec..240d3803b8b9 100644 > --- a/drivers/mmc/host/sunxi-mmc.c > +++ b/drivers/mmc/host/sunxi-mmc.c > @@ -1397,7 +1397,7 @@ static int sunxi_mmc_probe(struct platform_device *pdev) > MMC_CAP_SDIO_IRQ; > > /* > - * Some H5 devices do not have signal traces precise enough to > + * Some devices do not have signal traces precise enough to > * use HS DDR mode for their eMMC chips. > * > * We still enable HS DDR modes for all the other controller > @@ -1405,7 +1405,8 @@ static int sunxi_mmc_probe(struct platform_device *pdev) > */ > if ((host->cfg->clk_delays || host->use_new_timings) && > !of_device_is_compatible(pdev->dev.of_node, > - "allwinner,sun50i-h5-emmc")) > + "allwinner,sun50i-h5-emmc") && > + !of_machine_is_compatible("olimex,a64-olinuxino-emmc")) > mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; > > ret = mmc_of_parse(mmc); > -- > 2.28.0 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/0d590f91-5d7a-697a-5644-710d14e3ea75%40inventati.org.
