On Sun, 2 Aug 2020 at 09:01, Faiz Abbas <faiz_abbas@xxxxxx> wrote: > > Add binding documentation for mmc host controllers present on > TI's J7200 SOC > > Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx> Applied for next, thanks! Kind regards Uffe > --- > Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt > index 6d202f4d9249..b49cbfdd679f 100644 > --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt > +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt > @@ -12,6 +12,8 @@ Required Properties: > "ti,am654-sdhci-5.1": SDHCI on AM654 device. > "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device. > "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device. > + "ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device. > + "ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device. > - reg: Must be two entries. > - The first should be the sdhci register space > - The second should the subsystem/phy register space > @@ -33,7 +35,9 @@ Required Properties: > These bindings must be provided otherwise the driver will disable the > corresponding speed mode (i.e. all nodes must provide at least -legacy) > > -Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): > +Optional Properties (Required for ti,am654-sdhci-5.1, > + ti,j721e-sdhci-8bit, > + ti,j7200-sdhci-8bit): > - ti,trm-icp: DLL trim select > - ti,driver-strength-ohm: driver strength in ohms. > Valid values are 33, 40, 50, 66 and 100 ohms. > -- > 2.17.1 >
