[PATCH v2 4/4] mmc: sdhci-of-arasan: Fix kernel-doc warnings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Modify code to fix the warnings reported by kernel-doc for better
documentation.

Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
---
 drivers/mmc/host/sdhci-of-arasan.c | 114 ++++++++++++++++-------------
 1 file changed, 64 insertions(+), 50 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 89dbd1e9a830..0396d6b5396a 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -73,13 +73,13 @@ struct sdhci_arasan_soc_ctl_field {
 /**
  * struct sdhci_arasan_soc_ctl_map - Map in syscon to corecfg registers
  *
- * It's up to the licensee of the Arsan IP block to make these available
- * somewhere if needed.  Presumably these will be scattered somewhere that's
- * accessible via the syscon API.
- *
  * @baseclkfreq:	Where to find corecfg_baseclkfreq
  * @clockmultiplier:	Where to find corecfg_clockmultiplier
  * @hiword_update:	If true, use HIWORD_UPDATE to access the syscon
+ *
+ * It's up to the licensee of the Arsan IP block to make these available
+ * somewhere if needed.  Presumably these will be scattered somewhere that's
+ * accessible via the syscon API.
  */
 struct sdhci_arasan_soc_ctl_map {
 	struct sdhci_arasan_soc_ctl_field	baseclkfreq;
@@ -99,7 +99,8 @@ struct sdhci_arasan_clk_ops {
 };
 
 /**
- * struct sdhci_arasan_clk_data
+ * struct sdhci_arasan_clk_data - Arasan Controller Clock Data.
+ *
  * @sdcardclk_hw:	Struct for the clock we might provide to a PHY.
  * @sdcardclk:		Pointer to normal 'struct clock' for sdcardclk_hw.
  * @sampleclk_hw:	Struct for the clock we might provide to a PHY.
@@ -125,15 +126,18 @@ struct sdhci_arasan_zynqmp_clk_data {
 };
 
 /**
- * struct sdhci_arasan_data
+ * struct sdhci_arasan_data - Arasan Controller Data
+ *
  * @host:		Pointer to the main SDHCI host structure.
  * @clk_ahb:		Pointer to the AHB clock
  * @phy:		Pointer to the generic phy
  * @is_phy_on:		True if the PHY is on; false if not.
+ * @has_cqe:		True if controller has command queuing engine.
  * @clk_data:		Struct for the Arasan Controller Clock Data.
  * @clk_ops:		Struct for the Arasan Controller Clock Operations.
  * @soc_ctl_base:	Pointer to regmap for syscon for soc_ctl registers.
  * @soc_ctl_map:	Map to get offsets into soc_ctl registers.
+ * @quirks:		Arasan deviations from spec.
  */
 struct sdhci_arasan_data {
 	struct sdhci_host *host;
@@ -147,7 +151,7 @@ struct sdhci_arasan_data {
 
 	struct regmap	*soc_ctl_base;
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
-	unsigned int	quirks; /* Arasan deviations from spec */
+	unsigned int	quirks;
 
 /* Controller does not have CD wired and will not function normally without */
 #define SDHCI_ARASAN_QUIRK_FORCE_CDTEST	BIT(0)
@@ -183,14 +187,16 @@ static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = {
 /**
  * sdhci_arasan_syscon_write - Write to a field in soc_ctl registers
  *
+ * @host:	The sdhci_host
+ * @fld:	The field to write to
+ * @val:	The value to write
+ *
  * This function allows writing to fields in sdhci_arasan_soc_ctl_map.
  * Note that if a field is specified as not available (shift < 0) then
  * this function will silently return an error code.  It will be noisy
  * and print errors for any other (unexpected) errors.
  *
- * @host:	The sdhci_host
- * @fld:	The field to write to
- * @val:	The value to write
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_syscon_write(struct sdhci_host *host,
 				   const struct sdhci_arasan_soc_ctl_field *fld,
@@ -431,9 +437,10 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = {
 /**
  * sdhci_arasan_suspend - Suspend method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Put the device in a low power state.
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_suspend(struct device *dev)
 {
@@ -474,9 +481,10 @@ static int sdhci_arasan_suspend(struct device *dev)
 /**
  * sdhci_arasan_resume - Resume method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Resume operation after suspend
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_resume(struct device *dev)
 {
@@ -525,16 +533,16 @@ static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
 /**
  * sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the SD card clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the card clock rate.
+ * Return: The card clock rate.
  */
 static unsigned long sdhci_arasan_sdcardclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -552,16 +560,16 @@ static const struct clk_ops arasan_sdcardclk_ops = {
 /**
  * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the sampling clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the sample clock rate.
+ * Return: The sample clock rate.
  */
 static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -579,14 +587,14 @@ static const struct clk_ops arasan_sampleclk_ops = {
 /**
  * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Output Clock Tap Delays for Output path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -651,14 +659,14 @@ static const struct clk_ops zynqmp_sdcardclk_ops = {
 /**
  * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Input Clock Tap Delays for Input path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -723,10 +731,11 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
 /**
  * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Output Clock Tap Delays for Output path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
@@ -794,10 +803,11 @@ static const struct clk_ops versal_sdcardclk_ops = {
 /**
  * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Input Clock Tap Delays for Input path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
@@ -913,6 +923,9 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
 /**
  * sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier
  *
+ * @host:		The sdhci_host
+ * @value:		The value to write
+ *
  * The corecfg_clockmultiplier is supposed to contain clock multiplier
  * value of programmable clock generator.
  *
@@ -924,8 +937,6 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
  * - The value of corecfg_clockmultiplier should sync with that of corresponding
  *   value reading from sdhci_capability_register. So this function is called
  *   once at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 						u32 value)
@@ -952,6 +963,8 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 /**
  * sdhci_arasan_update_baseclkfreq - Set corecfg_baseclkfreq
  *
+ * @host:		The sdhci_host
+ *
  * The corecfg_baseclkfreq is supposed to contain the MHz of clk_xin.  This
  * function can be used to make that happen.
  *
@@ -963,8 +976,6 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
  * - It's assumed that clk_xin is not dynamic and that we use the SDHCI divider
  *   to achieve lower clock rates.  That means that this function is called once
  *   at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
 {
@@ -1028,10 +1039,10 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 /**
  * arasan_dt_parse_clk_phases - Read Clock Delay values from DT
  *
- * Called at initialization to parse the values of Clock Delays.
- *
  * @dev:		Pointer to our struct device.
  * @clk_data:		Pointer to the Clock Data structure
+ *
+ * Called at initialization to parse the values of Clock Delays.
  */
 static void arasan_dt_parse_clk_phases(struct device *dev,
 				       struct sdhci_arasan_clk_data *clk_data)
@@ -1202,14 +1213,15 @@ MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
 /**
  * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1251,14 +1263,15 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1300,10 +1313,10 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_unregister_sdclk - Undoes sdhci_arasan_register_sdclk()
  *
+ * @dev:		Pointer to our struct device.
+ *
  * Should be called any time we're exiting and sdhci_arasan_register_sdclk()
  * returned success.
- *
- * @dev:		Pointer to our struct device.
  */
 static void sdhci_arasan_unregister_sdclk(struct device *dev)
 {
@@ -1318,6 +1331,10 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
 /**
  * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
@@ -1330,10 +1347,7 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
  * to create nice clean device tree bindings and later (if needed) we can try
  * re-architecting SDHCI if we see some benefit to it.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
 				       struct clk *clk_xin,
-- 
2.17.1




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux