Re: [PATCH v4 00/14] few fix for sdhci-esdhc-imx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 19 Feb 2020 at 09:30, <haibo.chen@xxxxxxx> wrote:
>
> From: Haibo Chen <haibo.chen@xxxxxxx>
>
> ---
> Changes for v4:
> Add Adrian's ack for patch 9~12
> for patch 13, change to add the check for pinctrl error
> for patch 14, change to judge the dev->dma_parms first, if it not exist, then alloc it.

Series applied for next, but waiting with patch14 for a while, thanks!

Kind regards
Uffe


>
> Changes for v3:
> Add Linus Walleij's ack for patch 2
> for patch 9, drop the use of 'sdhci,auto-cmd23-broken' from dts, change to add flag ESDHC_FLAG_BROKEN_AUTO_CMD23 in the related esdhc_soc_data.
> for patch 10, add a new esdhc_soc_data for i.MX8MM
>
> Changes for v2:
> Add Adrian's ack for patch 1~8
> Patch 9~10, change to use 'sdhci,auto-cmd23-broken' instead of 'fsl,auto-cmd23-broken'
> Patch 11, clear cqhci irq status and halt cqhci, move this change to sdhci_esdhc_imx_hwinit()
> and add some comment to explain the reason.
> Patch 12, add error return check for pinctrl_pm_select_sleep_state()
> Patch 13, clear the DMA_SEL in sdhci-esdhc-imx.c instead of sdhci.c
> Patch 14, add the dev->dma_parms in core/queue.c, instead of host/sdhci.c.
>
>
> Haibo Chen (14):
>   mmc: sdhci: do not enable card detect interrupt for gpio cd type
>   mmc: sdhci-esdhc-imx: no fail when no pinctrl available
>   mmc: sdhci-esdhci-imx: retune needed for Mega/Mix enabled SoCs
>   mmc: sdhci-esdhc-imx: restore the per_clk rate in PM_RUNTIME
>   doc: dt: fsl-imx-esdhc: add strobe-dll-delay-target binding
>   mmc: sdhci-esdhc-imx: add strobe-dll-delay-target support
>   mmc: sdhci-esdhc-imx: optimize the clock setting
>   mmc: sdhci-esdhc-imx: optimize the strobe dll setting
>   mmc: sdhci-esdhc-imx: add flag ESDHC_FLAG_BROKEN_AUTO_CMD23
>   mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data for i.MX8MM
>   mmc: sdhci-esdhc-imx: clear pending interrupt and halt cqhci
>   mmc: sdhci-esdhc-imx: clear DMA_SEL when disable DMA mode
>   mmc: sdhci-esdhc-imx: restore pin state when resume back
>   mmc: queue: create dev->dma_parms before call dma_set_max_seg_size()
>
>  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt |   5 +
>  drivers/mmc/core/queue.c                      |  11 +-
>  drivers/mmc/host/sdhci-esdhc-imx.c            | 167 +++++++++++++++---
>  drivers/mmc/host/sdhci-esdhc.h                |   1 +
>  drivers/mmc/host/sdhci.c                      |   2 +-
>  include/linux/platform_data/mmc-esdhc-imx.h   |   1 +
>  6 files changed, 161 insertions(+), 26 deletions(-)
>
> --
> 2.17.1
>



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux