On Wed, 19 Feb 2020 at 10:29, Ben Chuang <benchuanggli@xxxxxxxxx> wrote:
>
> From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
>
> Enable MSI interrupt for GL9750/GL9755. Some platforms
> do not support PCI INTx and devices can not work without
> interrupt. Like messages below:
>
> [ 4.487132] sdhci-pci 0000:01:00.0: SDHCI controller found [17a0:9755] (rev 0)
> [ 4.487198] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PBR2._PRT.APS2], AE_NOT_FOUND (20190816/psargs-330)
> [ 4.487397] ACPI Error: Aborting method \_SB.PCI0.PBR2._PRT due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
> [ 4.487707] pcieport 0000:00:01.3: can't derive routing for PCI INT A
> [ 4.487709] sdhci-pci 0000:01:00.0: PCI INT A: no GSI
>
> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
Applied for fixes and by adding a stable tag, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-pci-gli.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index 5eea8d70a85d..ce15a05f23d4 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -262,10 +262,26 @@ static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
> return 0;
> }
>
> +static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot)
> +{
> + int ret;
> +
> + ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1,
> + PCI_IRQ_MSI | PCI_IRQ_MSIX);
> + if (ret < 0) {
> + pr_warn("%s: enable PCI MSI failed, error=%d\n",
> + mmc_hostname(slot->host->mmc), ret);
> + return;
> + }
> +
> + slot->host->irq = pci_irq_vector(slot->chip->pdev, 0);
> +}
> +
> static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> {
> struct sdhci_host *host = slot->host;
>
> + gli_pcie_enable_msi(slot);
> slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> sdhci_enable_v4_mode(host);
>
> @@ -276,6 +292,7 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
> {
> struct sdhci_host *host = slot->host;
>
> + gli_pcie_enable_msi(slot);
> slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> sdhci_enable_v4_mode(host);
>
> --
> 2.25.0
>
