there is a chance that always get response CRC error after HS200 tuning, the reason is that need set CMD_TA to 2. this modification is only for MT8173. Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx> --- drivers/mmc/host/mtk-sd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 189e42674d85..010fe29a4888 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -228,6 +228,7 @@ #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ +#define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */ #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ @@ -1881,6 +1882,7 @@ static int hs400_tune_response(struct mmc_host *mmc, u32 opcode) /* select EMMC50 PAD CMD tune */ sdr_set_bits(host->base + PAD_CMD_TUNE, BIT(0)); + sdr_set_field(host->base + MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMDTA, 2); if (mmc->ios.timing == MMC_TIMING_MMC_HS200 || mmc->ios.timing == MMC_TIMING_UHS_SDR104) -- 2.18.0
