Hi Fabio, On Fri, Oct 04, 2019 at 10:21:46AM -0300, Fabio Estevam wrote: > Hi, > > Booting kernel 5.3.2 on a imx28-evk leads to the mmc following error: > > [ 4.781251] Waiting for root device /dev/mmcblk0p3... > [ 6.786434] mmc0: error -110 whilst initialising SDIO card > [ 6.792765] mxs-mmc 80010000.spi: no support for card's volts > [ 6.798635] mmc0: error -22 whilst initialising SD card > [ 10.463583] mmc0: error -110 whilst initialising SDIO card > [ 10.469429] mxs-mmc 80010000.spi: no support for card's volts > [ 10.475520] mmc0: error -22 whilst initialising SD card > [ 12.861119] mxs-mmc 80010000.spi: card claims to support voltages > below defined range > [ 12.869069] mxs-mmc 80010000.spi: no support for card's volts > [ 12.875141] mmc0: error -22 whilst initialising SDIO card > [ 12.881346] mxs-mmc 80010000.spi: no support for card's volts > [ 12.887213] mmc0: error -22 whilst initialising SD card > [ 16.543620] mmc0: error -110 whilst initialising SDIO card > [ 16.549490] mxs-mmc 80010000.spi: no support for card's volts > [ 16.555588] mmc0: error -22 whilst initialising SD card > [ 18.941140] mxs-mmc 80010000.spi: card claims to support voltages > below defined range > [ 18.949093] mxs-mmc 80010000.spi: no support for card's volts > [ 18.955165] mmc0: error -22 whilst initialising SDIO card > [ 18.961103] mxs-mmc 80010000.spi: no support for card's volts > > I haven't debugged this regression yet, but I am wondering if anyone > else has an idea about it. Have you seen https://www.spinics.net/lists/linux-mtd/msg09535.html? I think your issue is something else though. Regards Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |