Hi, Booting kernel 5.3.2 on a imx28-evk leads to the mmc following error: [ 4.781251] Waiting for root device /dev/mmcblk0p3... [ 6.786434] mmc0: error -110 whilst initialising SDIO card [ 6.792765] mxs-mmc 80010000.spi: no support for card's volts [ 6.798635] mmc0: error -22 whilst initialising SD card [ 10.463583] mmc0: error -110 whilst initialising SDIO card [ 10.469429] mxs-mmc 80010000.spi: no support for card's volts [ 10.475520] mmc0: error -22 whilst initialising SD card [ 12.861119] mxs-mmc 80010000.spi: card claims to support voltages below defined range [ 12.869069] mxs-mmc 80010000.spi: no support for card's volts [ 12.875141] mmc0: error -22 whilst initialising SDIO card [ 12.881346] mxs-mmc 80010000.spi: no support for card's volts [ 12.887213] mmc0: error -22 whilst initialising SD card [ 16.543620] mmc0: error -110 whilst initialising SDIO card [ 16.549490] mxs-mmc 80010000.spi: no support for card's volts [ 16.555588] mmc0: error -22 whilst initialising SD card [ 18.941140] mxs-mmc 80010000.spi: card claims to support voltages below defined range [ 18.949093] mxs-mmc 80010000.spi: no support for card's volts [ 18.955165] mmc0: error -22 whilst initialising SDIO card [ 18.961103] mxs-mmc 80010000.spi: no support for card's volts I haven't debugged this regression yet, but I am wondering if anyone else has an idea about it. Thanks, Fabio Estevam
