The problem below seems to be sporadic with v5.3, which makes finding its cause quite difficult - and makes bisecting useless. I'd describe it as "likely" to affect either mmc0 or mmc1 on v5.3. I haven't seen it at all with v5.2. I'll see whether I can pin anything down tomorrow. On Mon, Sep 16, 2019 at 06:15:10PM +0100, Russell King - ARM Linux admin wrote: > Hi, > > It seems that somewhere between v5.2 and v5.3, sdhci fails to detect > SD cards on the NXP LX2160A, but continues to work with eMMC. > This uses the sdhci-esdhc driver. > > v5.2: > > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci-pltfm: SDHCI platform and OF driver helper > mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit > mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit > mmc0: new high speed SDHC card at address aaaa > mmcblk0: mmc0:aaaa SU04G 3.69 GiB > mmc1: new HS400 MMC card at address 0001 > mmcblk1: mmc1:0001 DF4064 58.2 GiB > mmcblk1boot0: mmc1:0001 DF4064 partition 1 4.00 MiB > mmcblk1boot1: mmc1:0001 DF4064 partition 2 4.00 MiB > mmcblk1rpmb: mmc1:0001 DF4064 partition 3 4.00 MiB, chardev (247:0) > mmcblk1: p1 > > v5.3: > > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci-pltfm: SDHCI platform and OF driver helper > mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit > mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit > mmc0: ADMA error > mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== > mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202 > mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 > mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 > mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038 > mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000 > mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000040d8 > mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001 > mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b > mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202 > mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00 > mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 > mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33 > mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 > mmc0: sdhci: Host ctl2: 0x00000000 > mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c > mmc0: sdhci: ============================================ > mmc0: error -5 whilst initialising SD card > mmc0: ADMA error > mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== > mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202 > mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 > mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 > mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038 > mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000 > mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00008098 > mmc0: sdhci: Timeout: 0x00000002 | Int stat: 0x00000001 > mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b > mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202 > mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00 > mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 > mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33 > mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 > mmc0: sdhci: Host ctl2: 0x00000000 > mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c > mmc0: sdhci: ============================================ > mmc0: error -5 whilst initialising SD card > mmc1: new HS400 MMC card at address 0001 > mmcblk1: mmc1:0001 DF4064 58.2 GiB > mmcblk1boot0: mmc1:0001 DF4064 partition 1 4.00 MiB > mmcblk1boot1: mmc1:0001 DF4064 partition 2 4.00 MiB > mmcblk1rpmb: mmc1:0001 DF4064 partition 3 4.00 MiB, chardev (247:0) > mmcblk1: p1 > mmc0: ADMA error > mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== > mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202 > mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 > mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 > mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038 > mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000 > mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000080d8 > mmc0: sdhci: Timeout: 0x00000002 | Int stat: 0x00000001 > mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b > mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202 > mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00 > mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 > mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33 > mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 > mmc0: sdhci: Host ctl2: 0x00000000 > mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c > mmc0: sdhci: ============================================ > mmc0: error -5 whilst initialising SD card > mmc0: ADMA error > mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== > mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202 > mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 > mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 > mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038 > mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000 > mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000080f8 > mmc0: sdhci: Timeout: 0x00000002 | Int stat: 0x00000001 > mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b > mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202 > mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00 > mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 > mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33 > mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 > mmc0: sdhci: Host ctl2: 0x00000000 > mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c > mmc0: sdhci: ============================================ > mmc0: error -5 whilst initialising SD card > > The platform has an iommu, which is in pass-through mode, via > arm_smmu.disable_bypass=0. > > -- > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ > FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up > According to speedtest.net: 11.9Mbps down 500kbps up > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
