On Mon, 17 Jun 2019 at 22:10, Raul E Rangel <rrangel@xxxxxxxxxxxx> wrote:
>
> The O2Micro controller only supports tuning at 4-bits. So the host driver
> needs to change the bus width while tuning and then set it back when done.
>
> There was a bug in the original implementation in that mmc->ios.bus_width
> also wasn't updated. Thus setting the incorrect blocksize in
> sdhci_send_tuning which results in a tuning failure.
>
> Signed-off-by: Raul E Rangel <rrangel@xxxxxxxxxxxx>
> Fixes: 0086fc217d5d7 ("mmc: sdhci: Add support for O2 hardware tuning")
> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Applied for fixes and by adding a stable tag, thanks!
Kind regards
Uffe
> ---
>
> drivers/mmc/host/sdhci-pci-o2micro.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index b29bf4e7dcb48..dd21315922c87 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -115,6 +115,7 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> */
> if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
> current_bus_width = mmc->ios.bus_width;
> + mmc->ios.bus_width = MMC_BUS_WIDTH_4;
> sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
> }
>
> @@ -126,8 +127,10 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
> sdhci_end_tuning(host);
>
> - if (current_bus_width == MMC_BUS_WIDTH_8)
> + if (current_bus_width == MMC_BUS_WIDTH_8) {
> + mmc->ios.bus_width = MMC_BUS_WIDTH_8;
> sdhci_set_bus_width(host, current_bus_width);
> + }
>
> host->flags &= ~SDHCI_HS400_TUNING;
> return 0;
> --
> 2.22.0.410.gd8fdbe21b5-goog
>
